lmh188
/
twain3.0
mirror of http://192.168.1.51:8099/lmh188/twain3.0
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
twain3.0/3rdparty/hgOCR/leptonica/utils1.c

1267 lines
36 KiB
C
Raw Normal View History

合并ocr更改
2021-11-20 06:24:33 +00:00
/*====================================================================*
- Copyright (C) 2001 Leptonica. All rights reserved.
-
- Redistribution and use in source and binary forms, with or without
- modification, are permitted provided that the following conditions
- are met:
- 1. Redistributions of source code must retain the above copyright
- notice, this list of conditions and the following disclaimer.
- 2. Redistributions in binary form must reproduce the above
- copyright notice, this list of conditions and the following
- disclaimer in the documentation and/or other materials
- provided with the distribution.
-
- THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL ANY
- CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
- EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
- PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
- PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
- OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
- NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*====================================================================*/
/*!
* \file utils1.c
* <pre>
*
* ------------------------------------------
* This file has these utilities:
* - error, warning and info messages
* - low-level endian conversions
* - file corruption operations
* - random and prime number operations
* - 64-bit hash functions
* - leptonica version number accessor
* - timing and date operations
* ------------------------------------------
*
* Control of error, warning and info messages
* l_int32 setMsgSeverity()
*
* Error return functions, invoked by macros
* l_int32 returnErrorInt()
* l_float32 returnErrorFloat()
* void *returnErrorPtr()
*
* Test files for equivalence
* l_int32 filesAreIdentical()
*
* Byte-swapping data conversion
* l_uint16 convertOnBigEnd16()
* l_uint32 convertOnBigEnd32()
* l_uint16 convertOnLittleEnd16()
* l_uint32 convertOnLittleEnd32()
*
* File corruption and byte replacement operations
* l_int32 fileCorruptByDeletion()
* l_int32 fileCorruptByMutation()
* l_int32 fileReplaceBytes()
*
* Generate random integer in given range
* l_int32 genRandomIntegerInRange()
*
* Simple math function
* l_int32 lept_roundftoi()
*
* 64-bit hash functions
* l_int32 l_hashStringToUint64()
* l_int32 l_hashPtToUint64()
* l_int32 l_hashFloat64ToUint64()
*
* Prime finders
* l_int32 findNextLargerPrime()
* l_int32 lept_isPrime()
*
* Gray code conversion
* l_uint32 convertIntToGrayCode()
* l_uint32 convertGrayCodeToInt()
*
* Leptonica version number
* char *getLeptonicaVersion()
*
* Timing
* void startTimer()
* l_float32 stopTimer()
* L_TIMER startTimerNested()
* l_float32 stopTimerNested()
* void l_getCurrentTime()
* L_WALLTIMER *startWallTimer()
* l_float32 stopWallTimer()
* void l_getFormattedDate()
*
* For all issues with cross-platform development, see utils2.c.
* </pre>
*/
#ifdef HAVE_CONFIG_H
#include "config_auto.h"
#endif /* HAVE_CONFIG_H */
#ifdef _WIN32
#include <windows.h>
#endif /* _WIN32 */
#include <time.h>
#include "allheaders.h"
#include <math.h>
/* Global for controlling message output at runtime */
LEPT_DLL l_int32 LeptMsgSeverity = DEFAULT_SEVERITY;
#define DEBUG_SEV 0
/*----------------------------------------------------------------------*
* Control of error, warning and info messages *
*----------------------------------------------------------------------*/
/*!
* \brief setMsgSeverity()
*
* \param[in] newsev
* \return oldsev
*
* <pre>
* Notes:
* (1) setMsgSeverity() allows the user to specify the desired
* message severity threshold. Messages of equal or greater
* severity will be output. The previous message severity is
* returned when the new severity is set.
* (2) If L_SEVERITY_EXTERNAL is passed, then the severity will be
* obtained from the LEPT_MSG_SEVERITY environment variable.
* </pre>
*/
l_int32
setMsgSeverity(l_int32 newsev)
{
l_int32 oldsev;
char *envsev;
oldsev = LeptMsgSeverity;
if (newsev == L_SEVERITY_EXTERNAL) {
envsev = getenv("LEPT_MSG_SEVERITY");
if (envsev) {
LeptMsgSeverity = atoi(envsev);
#if DEBUG_SEV
L_INFO("message severity set to external\n", "setMsgSeverity");
#endif /* DEBUG_SEV */
} else {
#if DEBUG_SEV
L_WARNING("environment var LEPT_MSG_SEVERITY not defined\n",
"setMsgSeverity");
#endif /* DEBUG_SEV */
}
} else {
LeptMsgSeverity = newsev;
#if DEBUG_SEV
L_INFO("message severity set to %d\n", "setMsgSeverity", newsev);
#endif /* DEBUG_SEV */
}
return oldsev;
}
/*----------------------------------------------------------------------*
* Error return functions, invoked by macros *
* *
* (1) These error functions print messages to stderr and allow *
* exit from the function that called them. *
* (2) They must be invoked only by the macros ERROR_INT, *
* ERROR_FLOAT and ERROR_PTR, which are in environ.h *
* (3) The print output can be disabled at compile time, either *
* by using -DNO_CONSOLE_IO or by setting LeptMsgSeverity. *
*----------------------------------------------------------------------*/
/*!
* \brief returnErrorInt()
*
* \param[in] msg error message
* \param[in] procname
* \param[in] ival return error val
* \return ival typically 1 for an error return
*/
l_int32
returnErrorInt(const char *msg,
const char *procname,
l_int32 ival)
{
fprintf(stderr, "Error in %s: %s\n", procname, msg);
return ival;
}
/*!
* \brief returnErrorFloat()
*
* \param[in] msg error message
* \param[in] procname
* \param[in] fval return error val
* \return fval
*/
l_float32
returnErrorFloat(const char *msg,
const char *procname,
l_float32 fval)
{
fprintf(stderr, "Error in %s: %s\n", procname, msg);
return fval;
}
/*!
* \brief returnErrorPtr()
*
* \param[in] msg error message
* \param[in] procname
* \param[in] pval return error val
* \return pval typically null for an error return
*/
void *
returnErrorPtr(const char *msg,
const char *procname,
void *pval)
{
fprintf(stderr, "Error in %s: %s\n", procname, msg);
return pval;
}
/*--------------------------------------------------------------------*
* Test files for equivalence *
*--------------------------------------------------------------------*/
/*!
* \brief filesAreIdentical()
*
* \param[in] fname1
* \param[in] fname2
* \param[out] psame 1 if identical; 0 if different
* \return 0 if OK, 1 on error
*/
l_ok
filesAreIdentical(const char *fname1,
const char *fname2,
l_int32 *psame)
{
l_int32 i, same;
size_t nbytes1, nbytes2;
l_uint8 *array1, *array2;
PROCNAME("filesAreIdentical");
if (!psame)
return ERROR_INT("&same not defined", procName, 1);
*psame = 0;
if (!fname1 || !fname2)
return ERROR_INT("both names not defined", procName, 1);
nbytes1 = nbytesInFile(fname1);
nbytes2 = nbytesInFile(fname2);
if (nbytes1 != nbytes2)
return 0;
if ((array1 = l_binaryRead(fname1, &nbytes1)) == NULL)
return ERROR_INT("array1 not read", procName, 1);
if ((array2 = l_binaryRead(fname2, &nbytes2)) == NULL) {
LEPT_FREE(array1);
return ERROR_INT("array2 not read", procName, 1);
}
same = 1;
for (i = 0; i < nbytes1; i++) {
if (array1[i] != array2[i]) {
same = 0;
break;
}
}
LEPT_FREE(array1);
LEPT_FREE(array2);
*psame = same;
return 0;
}
/*--------------------------------------------------------------------------*
* 16 and 32 bit byte-swapping on big endian and little endian machines *
* *
* These are typically used for I/O conversions: *
* (1) endian conversion for data that was read from a file *
* (2) endian conversion on data before it is written to a file *
*--------------------------------------------------------------------------*/
/*--------------------------------------------------------------------*
* 16-bit byte swapping *
*--------------------------------------------------------------------*/
#ifdef L_BIG_ENDIAN
l_uint16
convertOnBigEnd16(l_uint16 shortin)
{
return ((shortin << 8) | (shortin >> 8));
}
l_uint16
convertOnLittleEnd16(l_uint16 shortin)
{
return shortin;
}
#else /* L_LITTLE_ENDIAN */
l_uint16
convertOnLittleEnd16(l_uint16 shortin)
{
return ((shortin << 8) | (shortin >> 8));
}
l_uint16
convertOnBigEnd16(l_uint16 shortin)
{
return shortin;
}
#endif /* L_BIG_ENDIAN */
/*--------------------------------------------------------------------*
* 32-bit byte swapping *
*--------------------------------------------------------------------*/
#ifdef L_BIG_ENDIAN
l_uint32
convertOnBigEnd32(l_uint32 wordin)
{
return ((wordin << 24) | ((wordin << 8) & 0x00ff0000) |
((wordin >> 8) & 0x0000ff00) | (wordin >> 24));
}
l_uint32
convertOnLittleEnd32(l_uint32 wordin)
{
return wordin;
}
#else /* L_LITTLE_ENDIAN */
l_uint32
convertOnLittleEnd32(l_uint32 wordin)
{
return ((wordin << 24) | ((wordin << 8) & 0x00ff0000) |
((wordin >> 8) & 0x0000ff00) | (wordin >> 24));
}
l_uint32
convertOnBigEnd32(l_uint32 wordin)
{
return wordin;
}
#endif /* L_BIG_ENDIAN */
/*---------------------------------------------------------------------*
* File corruption and byte replacement operations *
*---------------------------------------------------------------------*/
/*!
* \brief fileCorruptByDeletion()
*
* \param[in] filein
* \param[in] loc fractional location of start of deletion
* \param[in] size fractional size of deletion
* \param[in] fileout corrupted file
* \return 0 if OK, 1 on error
*
* <pre>
* Notes:
* (1) %loc and %size are expressed as a fraction of the file size.
* (2) This makes a copy of the data in %filein, where bytes in the
* specified region have deleted.
* (3) If (%loc + %size) >= 1.0, this deletes from the position
* represented by %loc to the end of the file.
* (4) It is useful for testing robustness of I/O wrappers when the
* data is corrupted, by simulating data corruption by deletion.
* </pre>
*/
l_ok
fileCorruptByDeletion(const char *filein,
l_float32 loc,
l_float32 size,
const char *fileout)
{
l_int32 i, locb, sizeb, rembytes;
size_t inbytes, outbytes;
l_uint8 *datain, *dataout;
PROCNAME("fileCorruptByDeletion");
if (!filein || !fileout)
return ERROR_INT("filein and fileout not both specified", procName, 1);
if (loc < 0.0 || loc >= 1.0)
return ERROR_INT("loc must be in [0.0 ... 1.0)", procName, 1);
if (size <= 0.0)
return ERROR_INT("size must be > 0.0", procName, 1);
if (loc + size > 1.0)
size = 1.0 - loc;
datain = l_binaryRead(filein, &inbytes);
locb = (l_int32)(loc * inbytes + 0.5);
locb = L_MIN(locb, inbytes - 1);
sizeb = (l_int32)(size * inbytes + 0.5);
sizeb = L_MAX(1, sizeb);
sizeb = L_MIN(sizeb, inbytes - locb); /* >= 1 */
L_INFO("Removed %d bytes at location %d\n", procName, sizeb, locb);
rembytes = inbytes - locb - sizeb; /* >= 0; to be copied, after excision */
outbytes = inbytes - sizeb;
dataout = (l_uint8 *)LEPT_CALLOC(outbytes, 1);
for (i = 0; i < locb; i++)
dataout[i] = datain[i];
for (i = 0; i < rembytes; i++)
dataout[locb + i] = datain[locb + sizeb + i];
l_binaryWrite(fileout, "w", dataout, outbytes);
LEPT_FREE(datain);
LEPT_FREE(dataout);
return 0;
}
/*!
* \brief fileCorruptByMutation()
*
* \param[in] filein
* \param[in] loc fractional location of start of randomization
* \param[in] size fractional size of randomization
* \param[in] fileout corrupted file
* \return 0 if OK, 1 on error
*
* <pre>
* Notes:
* (1) %loc and %size are expressed as a fraction of the file size.
* (2) This makes a copy of the data in %filein, where bytes in the
* specified region have been replaced by random data.
* (3) If (%loc + %size) >= 1.0, this modifies data from the position
* represented by %loc to the end of the file.
* (4) It is useful for testing robustness of I/O wrappers when the
* data is corrupted, by simulating data corruption.
* </pre>
*/
l_ok
fileCorruptByMutation(const char *filein,
l_float32 loc,
l_float32 size,
const char *fileout)
{
l_int32 i, locb, sizeb;
size_t bytes;
l_uint8 *data;
PROCNAME("fileCorruptByMutation");
if (!filein || !fileout)
return ERROR_INT("filein and fileout not both specified", procName, 1);
if (loc < 0.0 || loc >= 1.0)
return ERROR_INT("loc must be in [0.0 ... 1.0)", procName, 1);
if (size <= 0.0)
return ERROR_INT("size must be > 0.0", procName, 1);
if (loc + size > 1.0)
size = 1.0 - loc;
data = l_binaryRead(filein, &bytes);
locb = (l_int32)(loc * bytes + 0.5);
locb = L_MIN(locb, bytes - 1);
sizeb = (l_int32)(size * bytes + 0.5);
sizeb = L_MAX(1, sizeb);
sizeb = L_MIN(sizeb, bytes - locb); /* >= 1 */
L_INFO("Randomizing %d bytes at location %d\n", procName, sizeb, locb);
/* Make an array of random bytes and do the substitution */
for (i = 0; i < sizeb; i++) {
data[locb + i] =
(l_uint8)(255.9 * ((l_float64)rand() / (l_float64)RAND_MAX));
}
l_binaryWrite(fileout, "w", data, bytes);
LEPT_FREE(data);
return 0;
}
/*!
* \brief fileReplaceBytes()
*
* \param[in] filein input file
* \param[in] start start location for replacement
* \param[in] nbytes number of bytes to be removed
* \param[in] newdata replacement bytes
* \param[in] newsize size of replacement bytes
* \param[in] fileout output file
* \return 0 if OK, 1 on error
*
* <pre>
* Notes:
* (1) To remove %nbytes without replacement, set %newdata == NULL.
* (2) One use is for replacing the date/time in a pdf file by a
* string of 12 '0's, effectively removing the date without
* invalidating the byte counters in the pdf file:
* fileReplaceBytes(filein 86 12 (char *)"000000000000" 12 fileout
* </pre>
*/
l_ok
fileReplaceBytes(const char *filein,
l_int32 start,
l_int32 nbytes,
l_uint8 *newdata,
size_t newsize,
const char *fileout)
{
l_int32 i, index;
size_t inbytes, outbytes;
l_uint8 *datain, *dataout;
PROCNAME("fileReplaceBytes");
if (!filein || !fileout)
return ERROR_INT("filein and fileout not both specified", procName, 1);
datain = l_binaryRead(filein, &inbytes);
if (start + nbytes > inbytes)
L_WARNING("start + nbytes > length(filein) = %zu\n", procName, inbytes);
if (!newdata) newsize = 0;
outbytes = inbytes - nbytes + newsize;
if ((dataout = (l_uint8 *)LEPT_CALLOC(outbytes, 1)) == NULL) {
LEPT_FREE(datain);
return ERROR_INT("calloc fail for dataout", procName, 1);
}
for (i = 0; i < start; i++)
dataout[i] = datain[i];
for (i = start; i < start + newsize; i++)
dataout[i] = newdata[i - start];
index = start + nbytes; /* for datain */
start += newsize; /* for dataout */
for (i = start; i < outbytes; i++, index++)
dataout[i] = datain[index];
l_binaryWrite(fileout, "w", dataout, outbytes);
LEPT_FREE(datain);
LEPT_FREE(dataout);
return 0;
}
/*---------------------------------------------------------------------*
* Generate random integer in given range *
*---------------------------------------------------------------------*/
/*!
* \brief genRandomIntegerInRange()
*
* \param[in] range size of range; must be >= 2
* \param[in] seed use 0 to skip; otherwise call srand
* \param[out] pval random integer in range {0 ... range-1}
* \return 0 if OK, 1 on error
*
* <pre>
* Notes:
* (1) For example, to choose a rand integer between 0 and 99,
* use %range = 100.
* </pre>
*/
l_ok
genRandomIntegerInRange(l_int32 range,
l_int32 seed,
l_int32 *pval)
{
PROCNAME("genRandomIntegerInRange");
if (!pval)
return ERROR_INT("&val not defined", procName, 1);
*pval = 0;
if (range < 2)
return ERROR_INT("range must be >= 2", procName, 1);
if (seed > 0) srand(seed);
*pval = (l_int32)((l_float64)range *
((l_float64)rand() / (l_float64)RAND_MAX));
return 0;
}
/*---------------------------------------------------------------------*
* Simple math function *
*---------------------------------------------------------------------*/
/*!
* \brief lept_roundftoi()
*
* \param[in] fval
* \return value rounded to int
*
* <pre>
* Notes:
* (1) For fval >= 0, fval --> round(fval) == floor(fval + 0.5)
* For fval < 0, fval --> -round(-fval))
* This is symmetric around 0.
* e.g., for fval in (-0.5 ... 0.5), fval --> 0
* </pre>
*/
l_int32
lept_roundftoi(l_float32 fval)
{
return (fval >= 0.0) ? (l_int32)(fval + 0.5) : (l_int32)(fval - 0.5);
}
/*---------------------------------------------------------------------*
* 64-bit hash functions *
*---------------------------------------------------------------------*/
/*!
* \brief l_hashStringToUint64()
*
* \param[in] str
* \param[out] phash hash value
* \return 0 if OK, 1 on error
*
* <pre>
* Notes:
* (1) The intent of the hash is to avoid collisions by mapping
* the string as randomly as possible into 64 bits.
* (2) To the extent that the hashes are random, the probability of
* a collision can be approximated by the square of the number
* of strings divided by 2^64. For 1 million strings, the
* collision probability is about 1 in 16 million.
* (3) I expect non-randomness of the distribution to be most evident
* for small text strings. This hash function has been tested
* for all 5-character text strings composed of 26 letters,
* of which there are 26^5 = 12356630. There are no hash
* collisions for this set.
* </pre>
*/
l_ok
l_hashStringToUint64(const char *str,
l_uint64 *phash)
{
l_uint64 hash, mulp;
PROCNAME("l_hashStringToUint64");
if (phash) *phash = 0;
if (!str || (str[0] == '\0'))
return ERROR_INT("str not defined or empty", procName, 1);
if (!phash)
return ERROR_INT("&hash not defined", procName, 1);
mulp = 26544357894361247; /* prime, about 1/700 of the max uint64 */
hash = 104395301;
while (*str) {
hash += (*str++ * mulp) ^ (hash >> 7); /* shift [1...23] are ok */
}
*phash = hash ^ (hash << 37);
return 0;
}
/*!
* \brief l_hashPtToUint64()
*
* \param[in] x, y
* \param[out] phash hash value
* \return 0 if OK, 1 on error
*
* <pre>
* Notes:
* (1) This simple hash function has no collisions for
* any of 400 million points with x and y up to 20000.
* (2) Previously used a much more complicated and slower function:
* mulp = 26544357894361;
* hash = 104395301;
* hash += (x * mulp) ^ (hash >> 5);
* hash ^= (hash << 7);
* hash += (y * mulp) ^ (hash >> 7);
* hash = hash ^ (hash << 11);
* Such logical gymnastics to get coverage over the 2^64
* values are not required.
* </pre>
*/
l_ok
l_hashPtToUint64(l_int32 x,
l_int32 y,
l_uint64 *phash)
{
PROCNAME("l_hashPtToUint64");
if (!phash)
return ERROR_INT("&hash not defined", procName, 1);
*phash = (l_uint64)(2173249142.3849 * x + 3763193258.6227 * y);
return 0;
}
/*!
* \brief l_hashFloat64ToUint64()
*
* \param[in] nbuckets
* \param[in] val
* \param[out] phash hash value
* \return 0 if OK, 1 on error
*
* <pre>
* Notes:
* (1) Simple, fast hash for using dnaHash with 64-bit data
* (e.g., sets and histograms).
* (2) The resulting hash is called a "key" in a lookup
* operation. The bucket for %val in a dnaHash is simply
* found by taking the mod of the hash with the number of
* buckets (which is prime). What gets stored in the
* dna in that bucket could depend on use, but for the most
* flexibility, we store an index into the associated dna.
* This is all that is required for generating either a hash set
* or a histogram (an example of a hash map).
* (3) For example, to generate a histogram, the histogram dna,
* a histogram of unique values aligned with the histogram dna,
* and a dnahash hashmap are built. See l_dnaMakeHistoByHash().
* </pre>
*/
l_ok
l_hashFloat64ToUint64(l_int32 nbuckets,
l_float64 val,
l_uint64 *phash)
{
PROCNAME("l_hashFloatToUint64");
if (!phash)
return ERROR_INT("&hash not defined", procName, 1);
*phash = (l_uint64)((21.732491 * nbuckets) * val);
return 0;
}
/*---------------------------------------------------------------------*
* Prime finders *
*---------------------------------------------------------------------*/
/*!
* \brief findNextLargerPrime()
*
* \param[in] start
* \param[out] pprime first prime larger than %start
* \return 0 if OK, 1 on error
*/
l_ok
findNextLargerPrime(l_int32 start,
l_uint32 *pprime)
{
l_int32 i, is_prime;
PROCNAME("findNextLargerPrime");
if (!pprime)
return ERROR_INT("&prime not defined", procName, 1);
*pprime = 0;
if (start <= 0)
return ERROR_INT("start must be > 0", procName, 1);
for (i = start + 1; ; i++) {
lept_isPrime(i, &is_prime, NULL);
if (is_prime) {
*pprime = i;
return 0;
}
}
return ERROR_INT("prime not found!", procName, 1);
}
/*!
* \brief lept_isPrime()
*
* \param[in] n 64-bit unsigned
* \param[out] pis_prime 1 if prime, 0 otherwise
* \param[out] pfactor [optional] smallest divisor, or 0 on error
* or if prime
* \return 0 if OK, 1 on error
*/
l_ok
lept_isPrime(l_uint64 n,
l_int32 *pis_prime,
l_uint32 *pfactor)
{
l_uint32 div;
l_uint64 limit, ratio;
PROCNAME("lept_isPrime");
if (pis_prime) *pis_prime = 0;
if (pfactor) *pfactor = 0;
if (!pis_prime)
return ERROR_INT("&is_prime not defined", procName, 1);
if (n <= 0)
return ERROR_INT("n must be > 0", procName, 1);
if (n % 2 == 0) {
if (pfactor) *pfactor = 2;
return 0;
}
limit = (l_uint64)sqrt((l_float64)n);
for (div = 3; div < limit; div += 2) {
ratio = n / div;
if (ratio * div == n) {
if (pfactor) *pfactor = div;
return 0;
}
}
*pis_prime = 1;
return 0;
}
/*---------------------------------------------------------------------*
* Gray code conversion *
*---------------------------------------------------------------------*/
/*!
* \brief convertIntToGrayCode()
*
* \param[in] val integer value
* \return corresponding gray code value
*
* <pre>
* Notes:
* (1) Gray code values corresponding to integers differ by
* only one bit transition between successive integers.
* </pre>
*/
l_uint32
convertIntToGrayCode(l_uint32 val)
{
return (val >> 1) ^ val;
}
/*!
* \brief convertGrayCodeToInt()
*
* \param[in] val gray code value
* \return corresponding integer value
*/
l_uint32
convertGrayCodeToInt(l_uint32 val)
{
l_uint32 shift;
for (shift = 1; shift < 32; shift <<= 1)
val ^= val >> shift;
return val;
}
/*---------------------------------------------------------------------*
* Leptonica version number *
*---------------------------------------------------------------------*/
/*!
* \brief getLeptonicaVersion()
*
* Return: string of version number (e.g., 'leptonica-1.74.2')
*
* Notes:
* (1) The caller has responsibility to free the memory.
*/
char *
getLeptonicaVersion()
{
size_t bufsize = 100;
char *version = (char *)LEPT_CALLOC(bufsize, sizeof(char));
#ifdef _MSC_VER
#ifdef _USRDLL
char dllStr[] = "DLL";
#else
char dllStr[] = "LIB";
#endif
#ifdef _DEBUG
char debugStr[] = "Debug";
#else
char debugStr[] = "Release";
#endif
#ifdef _M_IX86
char bitStr[] = " x86";
#elif _M_X64
char bitStr[] = " x64";
#else
char bitStr[] = "";
#endif
snprintf(version, bufsize, "leptonica-%d.%d.%d (%s, %s) [MSC v.%d %s %s%s]",
LIBLEPT_MAJOR_VERSION, LIBLEPT_MINOR_VERSION, LIBLEPT_PATCH_VERSION,
__DATE__, __TIME__, _MSC_VER, dllStr, debugStr, bitStr);
#else
snprintf(version, bufsize, "leptonica-%d.%d.%d", LIBLEPT_MAJOR_VERSION,
LIBLEPT_MINOR_VERSION, LIBLEPT_PATCH_VERSION);
#endif /* _MSC_VER */
return version;
}
/*---------------------------------------------------------------------*
* Timing procs *
*---------------------------------------------------------------------*/
#if !defined(_WIN32) && !defined(__Fuchsia__)
#include <sys/time.h>
#include <sys/resource.h>
static struct rusage rusage_before;
static struct rusage rusage_after;
/*!
* \brief startTimer(), stopTimer()
*
* Notes:
* (1) These measure the cpu time elapsed between the two calls:
* startTimer();
* ....
* fprintf(stderr, "Elapsed time = %7.3f sec\n", stopTimer());
*/
void
startTimer(void)
{
getrusage(RUSAGE_SELF, &rusage_before);
}
l_float32
stopTimer(void)
{
l_int32 tsec, tusec;
getrusage(RUSAGE_SELF, &rusage_after);
tsec = rusage_after.ru_utime.tv_sec - rusage_before.ru_utime.tv_sec;
tusec = rusage_after.ru_utime.tv_usec - rusage_before.ru_utime.tv_usec;
return (tsec + ((l_float32)tusec) / 1000000.0);
}
/*!
* \brief startTimerNested(), stopTimerNested()
*
* Example of usage:
*
* L_TIMER t1 = startTimerNested();
* ....
* L_TIMER t2 = startTimerNested();
* ....
* fprintf(stderr, "Elapsed time 2 = %7.3f sec\n", stopTimerNested(t2));
* ....
* fprintf(stderr, "Elapsed time 1 = %7.3f sec\n", stopTimerNested(t1));
*/
L_TIMER
startTimerNested(void)
{
struct rusage *rusage_start;
rusage_start = (struct rusage *)LEPT_CALLOC(1, sizeof(struct rusage));
getrusage(RUSAGE_SELF, rusage_start);
return rusage_start;
}
l_float32
stopTimerNested(L_TIMER rusage_start)
{
l_int32 tsec, tusec;
struct rusage rusage_stop;
getrusage(RUSAGE_SELF, &rusage_stop);
tsec = rusage_stop.ru_utime.tv_sec -
((struct rusage *)rusage_start)->ru_utime.tv_sec;
tusec = rusage_stop.ru_utime.tv_usec -
((struct rusage *)rusage_start)->ru_utime.tv_usec;
LEPT_FREE(rusage_start);
return (tsec + ((l_float32)tusec) / 1000000.0);
}
/*!
* \brief l_getCurrentTime()
*
* \param[out] sec [optional] in seconds since birth of Unix
* \param[out] usec [optional] in microseconds since birth of Unix
* \return void
*/
void
l_getCurrentTime(l_int32 *sec,
l_int32 *usec)
{
struct timeval tv;
gettimeofday(&tv, NULL);
if (sec) *sec = (l_int32)tv.tv_sec;
if (usec) *usec = (l_int32)tv.tv_usec;
return;
}
#elif defined(__Fuchsia__) /* resource.h not implemented on Fuchsia. */
/* Timer functions are used for testing and debugging, and
* are stubbed out. If they are needed in the future, they
* can be implemented in Fuchsia using the zircon syscall
* zx_object_get_info() in ZX_INFOR_THREAD_STATS mode. */
void
startTimer(void)
{
}
l_float32
stopTimer(void)
{
return 0.0;
}
L_TIMER
startTimerNested(void)
{
return NULL;
}
l_float32
stopTimerNested(L_TIMER rusage_start)
{
return 0.0;
}
void
l_getCurrentTime(l_int32 *sec,
l_int32 *usec)
{
}
#else /* _WIN32 : resource.h not implemented under Windows */
/* Note: if division by 10^7 seems strange, the time is expressed
* as the number of 100-nanosecond intervals that have elapsed
* since 12:00 A.M. January 1, 1601. */
static ULARGE_INTEGER utime_before;
static ULARGE_INTEGER utime_after;
void
startTimer(void)
{
HANDLE this_process;
FILETIME start, stop, kernel, user;
this_process = GetCurrentProcess();
GetProcessTimes(this_process, &start, &stop, &kernel, &user);
utime_before.LowPart = user.dwLowDateTime;
utime_before.HighPart = user.dwHighDateTime;
}
l_float32
stopTimer(void)
{
HANDLE this_process;
FILETIME start, stop, kernel, user;
ULONGLONG hnsec; /* in units of hecto-nanosecond (100 ns) intervals */
this_process = GetCurrentProcess();
GetProcessTimes(this_process, &start, &stop, &kernel, &user);
utime_after.LowPart = user.dwLowDateTime;
utime_after.HighPart = user.dwHighDateTime;
hnsec = utime_after.QuadPart - utime_before.QuadPart;
return (l_float32)(signed)hnsec / 10000000.0;
}
L_TIMER
startTimerNested(void)
{
HANDLE this_process;
FILETIME start, stop, kernel, user;
ULARGE_INTEGER *utime_start;
this_process = GetCurrentProcess();
GetProcessTimes (this_process, &start, &stop, &kernel, &user);
utime_start = (ULARGE_INTEGER *)LEPT_CALLOC(1, sizeof(ULARGE_INTEGER));
utime_start->LowPart = user.dwLowDateTime;
utime_start->HighPart = user.dwHighDateTime;
return utime_start;
}
l_float32
stopTimerNested(L_TIMER utime_start)
{
HANDLE this_process;
FILETIME start, stop, kernel, user;
ULARGE_INTEGER utime_stop;
ULONGLONG hnsec; /* in units of 100 ns intervals */
this_process = GetCurrentProcess ();
GetProcessTimes (this_process, &start, &stop, &kernel, &user);
utime_stop.LowPart = user.dwLowDateTime;
utime_stop.HighPart = user.dwHighDateTime;
hnsec = utime_stop.QuadPart - ((ULARGE_INTEGER *)utime_start)->QuadPart;
LEPT_FREE(utime_start);
return (l_float32)(signed)hnsec / 10000000.0;
}
void
l_getCurrentTime(l_int32 *sec,
l_int32 *usec)
{
ULARGE_INTEGER utime, birthunix;
FILETIME systemtime;
LONGLONG birthunixhnsec = 116444736000000000; /*in units of 100 ns */
LONGLONG usecs;
GetSystemTimeAsFileTime(&systemtime);
utime.LowPart = systemtime.dwLowDateTime;
utime.HighPart = systemtime.dwHighDateTime;
birthunix.LowPart = (DWORD) birthunixhnsec;
birthunix.HighPart = birthunixhnsec >> 32;
usecs = (LONGLONG) ((utime.QuadPart - birthunix.QuadPart) / 10);
if (sec) *sec = (l_int32) (usecs / 1000000);
if (usec) *usec = (l_int32) (usecs % 1000000);
return;
}
#endif
/*!
* \brief startWallTimer()
*
* \return walltimer-ptr
*
* <pre>
* Notes:
* (1) These measure the wall clock time elapsed between the two calls:
* L_WALLTIMER *timer = startWallTimer();
* ....
* fprintf(stderr, "Elapsed time = %f sec\n", stopWallTimer(&timer);
* (2) Note that the timer object is destroyed by stopWallTimer().
* </pre>
*/
L_WALLTIMER *
startWallTimer(void)
{
L_WALLTIMER *timer;
timer = (L_WALLTIMER *)LEPT_CALLOC(1, sizeof(L_WALLTIMER));
l_getCurrentTime(&timer->start_sec, &timer->start_usec);
return timer;
}
/*!
* \brief stopWallTimer()
*
* \param[in,out] ptimer walltimer pointer
* \return time wall time elapsed in seconds
*/
l_float32
stopWallTimer(L_WALLTIMER **ptimer)
{
l_int32 tsec, tusec;
L_WALLTIMER *timer;
PROCNAME("stopWallTimer");
if (!ptimer)
return (l_float32)ERROR_FLOAT("&timer not defined", procName, 0.0);
timer = *ptimer;
if (!timer)
return (l_float32)ERROR_FLOAT("timer not defined", procName, 0.0);
l_getCurrentTime(&timer->stop_sec, &timer->stop_usec);
tsec = timer->stop_sec - timer->start_sec;
tusec = timer->stop_usec - timer->start_usec;
LEPT_FREE(timer);
*ptimer = NULL;
return (tsec + ((l_float32)tusec) / 1000000.0);
}
/*!
* \brief l_getFormattedDate()
*
* \return formatted date string, or NULL on error
*
* <pre>
* Notes:
* (1) This is used in pdf, in the form specified in section 3.8.2 of
* http://partners.adobe.com/public/developer/en/pdf/PDFReference.pdf
* (2) Contributed by Dave Bryan. Works on all platforms.
* </pre>
*/
char *
l_getFormattedDate()
{
char buf[128] = "", sep = 'Z';
l_int32 gmt_offset, relh, relm;
time_t ut, lt;
struct tm Tm;
struct tm *tptr = &Tm;
ut = time(NULL);
/* This generates a second "time_t" value by calling "gmtime" to
fill in a "tm" structure expressed as UTC and then calling
"mktime", which expects a "tm" structure expressed as the
local time. The result is a value that is offset from the
value returned by the "time" function by the local UTC offset.
"tm_isdst" is set to -1 to tell "mktime" to determine for
itself whether DST is in effect. This is necessary because
"gmtime" always sets "tm_isdst" to 0, which would tell
"mktime" to presume that DST is not in effect. */
#ifdef _WIN32
#ifdef _MSC_VER
gmtime_s(tptr, &ut);
#else /* mingw */
tptr = gmtime(&ut);
#endif
#else
gmtime_r(&ut, tptr);
#endif
tptr->tm_isdst = -1;
lt = mktime(tptr);
/* Calls "difftime" to obtain the resulting difference in seconds,
* because "time_t" is an opaque type, per the C standard. */
gmt_offset = (l_int32) difftime(ut, lt);
if (gmt_offset > 0)
sep = '+';
else if (gmt_offset < 0)
sep = '-';
relh = L_ABS(gmt_offset) / 3600;
relm = (L_ABS(gmt_offset) % 3600) / 60;
#ifdef _WIN32
#ifdef _MSC_VER
localtime_s(tptr, &ut);
#else /* mingw */
tptr = localtime(&ut);
#endif
#else
localtime_r(&ut, tptr);
#endif
strftime(buf, sizeof(buf), "%Y%m%d%H%M%S", tptr);
sprintf(buf + 14, "%c%02d'%02d'", sep, relh, relm);
return stringNew(buf);
}