zynq_7010/zynq_7010_code/CMakeLists.txt

cmake_minimum_required(VERSION 3.0.0)
project(scanservice)
add_compile_options(-std=c++14)
#set (CMAKE_GENERATOR "/home/holdtecs/zzm-linux/rk3288-linux/prebuilts/gcc/linux-x86/arm/gcc-linaro-6.3.1-2017.05-x86_64_arm-linux-gnueabihf/bin/arm-linux-gnueabihf-g++")




#交叉编译配置
# set(CMAKE_SYSTEM_NAME Linux)
# set(CMAKE_SYSTEM_PROCESSOR arm)

#可选，配置roofs和安装路径如果存在
#set(linux_sdk_path /home/holdtecs/zzm-linux/rk3288-linux)
#set(linux_sdk_path /mnt/disk2/linux-rhx/rk3288-linux)
#set(CMAKE_SYSROOT ${linux_sdk_path}/buildroot/output/rockchip_rk3288/host/arm-buildroot-linux-gnueabihf/sysroot)
# set(CMAKE_STAGING_PREFIX ${PROJECT_SOURCE_DIR}/install)

#编译工具配置
#set(tools ${linux_sdk_path}/prebuilts/gcc/linux-x86/arm/gcc-linaro-6.3.1-2017.05-x86_64_arm-linux-gnueabihf)
# set(CMAKE_C_COMPILER arm-linux-gnueabihf-gcc)
# set(CMAKE_CXX_COMPILER arm-linux-gnueabihf-g++)
# set(CMAKE_LIBRARY_ARCHITECTURE arm)
#add_subdirectory(fpga)
set(-mfloat-abi=hard)

# set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
# set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
# set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
# set(CMAKE_FIND_ROOT_PATH_MODE_PACKAGE ONLY)
# set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -O1 -fvectorize")
# set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -O1 -fvectorize")

set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -O2")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -O2")

set(OpenCV_DIR /home/modehua/sdk/sysroots/cortexa9t2hf-neon-xilinx-linux-gnueabi/usr/include/opencv4/)
#set(OpenCV_DIR /home/holdtecs/zzm-linux/fs/usr/lib)
#find_package( OpenCV 3 REQUIRED   )
include_directories( ${OpenCV_INCLUDE_DIRS} )

FILE(GLOB SRC "*.cpp" "*.h" "*.c")
FILE(GLOB IMAGEPRO "imageprocess/*.h" "imageprocess/*.cpp" )
FILE(GLOB FPGA "fpga/*.h" "fpga/*.cpp" )
# message(STATUS "SRC:" ${SRC})
# message(STATUS "IMAGEPRO:" ${IMAGEPRO})
 #message(STATUS "FPGA:" ${FPGA})
 set(CMAKE_BUILD_TYPE "Release")

 include_directories(
     fpga
     imageprocess
     imageprocess/include
     #/home/modehua/sdk/sysroots/cortexa9t2hf-neon-xilinx-linux-gnueabi/usr/include/opencv4/
 )


add_executable(${PROJECT_NAME}  ${SRC})

#优化代码大小
 SET(-CMAKE_BUILD_TYPE "Release")
install(TARGETS ${PROJECT_NAME} DESTINATION bin)


add_custom_command(TARGET ${PROJECT_NAME} 
                    POST_BUILD
                    COMMAND $ENV{STRIP} -s ${PROJECT_NAME})


set_target_properties(${PROJECT_NAME} PROPERTIES LINK_FLAGS_RELEASE  "-s")
#target_link_libraries(${PROJECT_NAME} ${PROJECT_BINARY_DIR}/bin/libfpgaupdate.a)
target_link_libraries(${PROJECT_NAME}  opencv_core opencv_highgui opencv_imgproc opencv_imgcodecs turbojpeg pthread ) 
target_link_libraries(${PROJECT_NAME}  pthread ) 

target_include_directories(${PROJECT_NAME} PRIVATE ${PROJECT_SOURCE_DIR} 
    ${PROJECT_SOURCE_DIR}/fpga
    /home/modehua/sdk/sysroots/cortexa9t2hf-neon-xilinx-linux-gnueabi/usr/include/opencv4/
)