lmh188
/
zynq_7010
mirror of http://192.168.10.5:8099/huagao/zynq_7010.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

优化代码

This commit is contained in:
modehua 2023-11-17 19:48:39 -08:00
parent c38c0283aa
commit 21dd8dfef4
18 changed files with 413 additions and 1215 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

58
zynq_7010_code/DevUtil.h
View File

@ -63,63 +63,7 @@ enum PIN_PORT_7010
MOTOR_POWER_1 = 64 + 901, //电机1 电源开关
MOTOR_POWER_2 = 65 + 901, //电机2 电源开关
};
enum PORTS
{
//Start = 171,
//Stop = 49,
//Power = 5,
Fpga_InitN = 7,//GPIO0_A7
Fpga_Load = 8,//GPIO0_B7
#ifndef G300
Power_12v_Off = 12,
#endif
//MotorPower = 48,
//CuoZhiMotor_Reset = 56,
//CuoZhiMotor_Sleep = 57,
//CuoZhiMotor_Enable = 58,
//CuoZhiMotor_Direction = 62,
//CuoZhiMotor_Decay = 63,
//CuoZhiMotor_Home = 184,
//CuoZhiMotor_Fault = 185,
//CuoZhiMotor_Mode0 = 59,
//CuoZhiMotor_Mode1 = 60,
//CuoZhiMotor_Mode2 = 61,
//Cover = 189,// 'GPIO6A5' opened:0 ; closed:1
//Paper = 225,// 'GPIO7B1' has paper:0 ; no paper:1
//Scan = 226,// 'GPIO7B2' no paper:0 ; has paper:1
//PaperJam = 102,
//Double_Paper = 219,// 'GPIO7A3' not doubled:0 ; doubled:1
SW_NOR_FLASH = 221,
//Double_Enable = 250,// 'GPIO8A2' off: 0 ; on: 1
//ZouZhiMotor_Reset = 64,
//ZouZhiMotor_Sleep = 65,
//ZouZhiMotor_Enable = 66,
//ZouZhiMotor_Direction = 70,
//ZouZhiMotor_Decay = 71,
//ZouZhiMotor_Home = 187,
//ZouZhiMotor_Fault = 188,
//ZouZhiMotor_Mode0 = 67,
//ZouZhiMotor_Mode1 = 68,
//ZouZhiMotor_Mode2 = 69,
CIS_3v3_Off = 96,
CIS_5v_En = 98,
Fpga_InitDone = 99,
Image_In_Transfer = 101,
Fpga_Reset = 232,
CIS_T_S0=190,
CIS_T_S1=191,
CIS_T_S2=234,
CIS_T_S3=233
};
class DeviceExport
{
public:

3
zynq_7010_code/FsmState.cpp
View File

@ -17,7 +17,6 @@ std::map<std::string, std::shared_ptr<FsmState>> FsmStateManager::fsmStates;
void StandbyState::initial()
{
printf("INIT FSM:扫描仪准备完成 \n");
//typeName = "StandbyState";
scanner->getPanelLeds().setStatus(LedStatus::Ready);
doReset();
}
@ -129,7 +128,7 @@ void ErrorJamState::doPaper_pullout()
FsmState *ErrorJamState::on_event(ScanEvent event)
{
//printf("ErrorJamState on_event %d \n", event);
printf("FSM :卡纸--->返回状态: %d \n",event);
if (scanner->getSensor().isCoverClosed() && !scanner->getSensor().isPaperStandby() && !scanner->getSensor().isPaperIn())
{
return FsmStateManagerEx<StandbyState>::GetState();

29
zynq_7010_code/FsmState.h
View File

@ -9,35 +9,6 @@
class Scanner;
enum ScanEvent {
S_EVT_NORES = 0x0,
S_EVT_SCAN_FINISHED = 0x2,
S_EVT_CLEAR_ERR = 0x03,
S_EVT_PAPER_PULLOUT = 0x05,
S_EVT_COVER_OPENED = 0x01,
S_EVT_COVER_CLOSED = 0x102,
S_EVT_PAPER_AT_SCAN = 0x08,
S_EVT_PAPER_NOT_AT_SCAN = 0x106,
S_EVT_DOUBLEPAPER = 0x110,
S_EVT_NOT_DOUBLEPAPER = 0x111,
S_EVT_START_SCAN = 0x45,
S_EVT_STOP_SCAN = 0x46,
S_EVT_SCAN_STARTED = 0x112,
S_EVT_SCAN_STOPPED = 0x113,
S_EVT_JAM_IN = 0x114,
S_EVT_JAM_OUT = 0x115,
S_EVT_SAMPLE_ERR = 0x116,
S_EVT_COVER_IN_OPEN = 0x117,
S_EVT_ERROR_PICKING = 0x4,
S_EVT_ERROR_JAM = 0x8,
S_EVT_ERROR_DOUBLEPAPER = 0x10,
S_EVT_ERROR_STAPLE = 0x20,
S_EVT_ERROR_FPGA = 0x44,
S_EVT_HAVING_IMAGE = 0x47,
S_EVT_ONE_PAPER_END = 0x59,
S_EVT_PAPER_NOT_STANDBY = 0,//?
S_EVT_PAPER_STANDBY = 0 //?
};
class FsmState

6
zynq_7010_code/ICapturer.h
View File

@ -54,8 +54,12 @@ public:
virtual void SetLowPower(bool islow) = 0;
virtual void set_image_callback(image_callback cb)= 0;
virtual void wait_image_notify()= 0;
protected:
BlockingQueue<V4L2_DATAINFO> m_v4l2data;
std::shared_ptr<HCamDevice> video;//Capturer 类内部自己初始化
HG_ScanConfiguration m_config;
image_callback image_cb_;
};

201
zynq_7010_code/MultiFrameCapture.cpp
View File

@ -6,39 +6,27 @@
#include "CameraParam.h"
#include "correct_ultis.h"
#include "filetools.h"
#include "USBProtocol.h"
#include "utilsfunc.h"
#include "CImageMerge.h"
#include "Jpegcompress.h"
#include "ThreadPool.h"
#include "HCamDevice.h"
#include "StopWatch.h"
const int vsp_A = 45;
const int vsp_B = 45;
#define ARRAYLEN(table) (sizeof(table) / sizeof(table[0]))
// using namespace cv;
MultiFrameCapture::MultiFrameCapture(ScannerGlue glue) :
frame_count(1),
b_snap_run(true),
b_stop_snap(false),
b_imgproc(true),
m_glue(glue),
iImageremain(0),
bScanning(false),
MultiFrameCapture::MultiFrameCapture(ScannerGlue glue) :b_snap_run(true),b_stop_snap(false),
m_glue(glue), bScanning(false),
////////////////默认300dpi 和灰度设置
resolution_(DPI_300),
v4l2_width_(WIDTH),
v4l2_height_(HEIGHT),
pixels_width_(WIDTH),
fpga_height_(HEIGHT),
resolution_(DPI_300), v4l2_width_(WIDTH),
v4l2_height_(HEIGHT), pixels_width_(WIDTH),
paper_size_((unsigned int)PaperSize::G400_AUTO),
color_mode_(GRAY),
is_correct_(0),
is_double_paper_(0),
is_remove_morr_(0),
m_cv_snap_is_scaning(false)
color_mode_(GRAY), is_correct_(0),
is_double_paper_(0), is_remove_morr_(0)
{
video.reset(new HCamDevice);
video->HtCamSetdivder(true);
@ -46,34 +34,24 @@ MultiFrameCapture::MultiFrameCapture(ScannerGlue glue) :
m_snap_thread.reset(new std::thread(&MultiFrameCapture::snaprun, this));
m_imgproc_thread.reset(new std::thread(&MultiFrameCapture::procimage, this));
}
MultiFrameCapture::~MultiFrameCapture()
{
if (video.get())
video.reset();
m_frameinfos.Clear();
m_frameinfos.ShutDown();
if (m_imgproc_thread.get())
{
if (m_imgproc_thread->joinable())
{
b_imgproc = false;
m_imgproc_thread->join();
}
}
#ifdef TEST_SIMCAP
if (m_test_pimg)
free(m_test_pimg);
#endif
}
void MultiFrameCapture::SetParent(void *scanner)
{
video->HtCamSetdivder(true);
}
void MultiFrameCapture::open()
{
int ret = video->open_device(v4l2_width_,v4l2_height_);
@ -87,10 +65,8 @@ void MultiFrameCapture::open()
i = video->HtCamReadCaptureFrame((void **)&buf, 10);
}
}
void MultiFrameCapture::snap()
{
#ifndef TEST_SIMCAP
std::lock_guard<std::mutex> m_lock(m_mtx_snap);
b_stop_snap = b_end_snap = false;
@ -102,31 +78,26 @@ void MultiFrameCapture::snap()
this_thread::sleep_for(std::chrono::milliseconds(10));
video->HtCamStartVideoCapturing();
m_cv_snap.notify_all();
#endif
}
void MultiFrameCapture::stopsnap(bool autosize)
{
if (autosize)
{
printf("走纸已完成 等待图像采集完成\r\n");
video->HtCamStopSampling();
b_stop_snap = true;
}
}
void MultiFrameCapture::close()
{
if (video.get())
video->close_device();
}
int MultiFrameCapture::read(int addr)
{
}
void *MultiFrameCapture::readFrameTest(int timeout)
{
return nullptr;
@ -135,7 +106,6 @@ void MultiFrameCapture::SetLowPower(bool islow)
{
video->HtCamSetLowPower(islow);
}
#include<math.h>
uint32_t MultiFrameCapture::compute_frame(int paper_size,int dpi)
{
@ -177,8 +147,6 @@ void MultiFrameCapture::UpdateScanParam(HG_ScanConfiguration config)
{
return ;
}
int config_dpi = config.params.dpi;
int config_color = config.params.isColor;
resolution_ = config.params.dpi; //0:600dpi 1:300dpi config.params.dpi = 2||3 pc 1 代表200 2代表300 3代表600
color_mode_ = config.params.isColor;
@ -191,14 +159,13 @@ void MultiFrameCapture::UpdateScanParam(HG_ScanConfiguration config)
video->HtCamSetPeriod(config.params.dc);
//int height = resolution_ == DPI_600 ? 342 : 900;
int height = config.params.dpi == 3 ? 900 :(config.params.dpi == 2?999:300);
compute_height(WIDTH , height);
video->HtCamSetClolr(color_mode_);
video->HtCamSetDpi(resolution_);
FPGAConfigParam fpgaparam = GetFpgaparam(config_dpi, config_color);
FPGAConfigParam fpgaparam = GetFpgaparam(resolution_, color_mode_);
video->HtCamSetSpTime(fpgaparam.Sp,fpgaparam.MaxExp); //3通道 75 6通道49
if (color_mode_)
{
@ -206,7 +173,7 @@ void MultiFrameCapture::UpdateScanParam(HG_ScanConfiguration config)
}
video->HtCamSetStSp(fpgaparam.MaxBright);//172 是根据实际测试出来的图像质量得来 172 6通道 3通道 260
configFPGAParam(config_color, config_dpi);
configFPGAParam(color_mode_, resolution_);
{
int val = resolution_ == 3 ? 600 :(resolution_ == 2?300:200);
@ -245,17 +212,13 @@ void MultiFrameCapture::UpdateScanParam(HG_ScanConfiguration config)
}
}
//关于帧数设置：一定要注意帧数的数量 直接影响到你usb传输效率
uint32_t cnt = compute_frame(paper_size_ , val) ;
if (resolution_ == 2 && paper_size_ == (int)PaperSize::G400_A4)
if (resolution_ == 2)
{
cnt -=1 ;
}
if (resolution_ == 3)
{
cnt += 2 ;
}
video->HtCamSetFrameCnt(cnt);
printf(" -----------------------设置帧数：%d------------------\r\n",cnt);
}
@ -264,12 +227,8 @@ void MultiFrameCapture::UpdateScanParam(HG_ScanConfiguration config)
printf("分辨率：%d\r\n",resolution_);
printf("V4L2宽: %d 高：%d\r\n",v4l2_width_,v4l2_height_);
printf("像素宽：%d 高: %d\r\n",pixels_width_,pixels_height_);
printf("fpga_height_:%d\r\n", fpga_height_);
printf("color_mode_:%d\r\n", color_mode_);
printf("paper_size_:%d\r\n", paper_size_);
}
void MultiFrameCapture::createCorrect(int correctmode)
{
if (m_correctThread.joinable())
@ -277,25 +236,19 @@ void MultiFrameCapture::createCorrect(int correctmode)
stop_countdown();
m_correctThread = std::thread(&MultiFrameCapture::correctcolor, this, correctmode);
}
void MultiFrameCapture::setFPGATriggerMode(bool autotrigger, int delay)
{
}
void MultiFrameCapture::setFanMode(int mode)
{
}
void MultiFrameCapture::fpgaReload()
{
{
}
bool MultiFrameCapture::capturerImage()
{
return true;
}
void MultiFrameCapture::waitsnapdone(int state)
{
StopWatch sw;
@ -324,33 +277,25 @@ void MultiFrameCapture::waitsnapdone(int state)
b_end_snap = true;
printf("!!!!!!!!!!!!!!!! m_cv_snapdone wait done :%f \n",sw.elapsed_ms());
}
bool MultiFrameCapture::IsImageQueueEmpty()
{
//printf(" m_frameinfos.Size = %d iImageremain = %d bScanning = %d\n", m_frameinfos.Size(), iImageremain.operator int(), bScanning);
return (m_frameinfos.Size() == 0 && iImageremain == 0) && !bScanning;
return !bScanning;
}
void MultiFrameCapture::resetimageremain()
{
iImageremain = 0;
}
std::atomic_int &MultiFrameCapture::getimageremain()
{
return iImageremain;
}
void MultiFrameCapture::clearimages()
{
m_frameinfos.Clear();
}
void MultiFrameCapture::setScanFlag(bool brun)
{
bScanning = brun;
}
void MultiFrameCapture::configFPGAParam(int mode, int dpi)
{
FPGAConfigParam fpgaparam = GetFpgaparam(dpi, mode);
@ -362,7 +307,6 @@ void MultiFrameCapture::configFPGAParam(int mode, int dpi)
{
video->HtCamWriteADCReg_ALL(true,true,i,fpgaparam.GainF[i]);
video->HtCamWriteADCReg_ALL(false,true,i,fpgaparam.OffsetF[i]);
video->HtCamWriteADCReg_ALL(true,false,i,fpgaparam.GainB[i]);
video->HtCamWriteADCReg_ALL(false,false,i,fpgaparam.OffsetB[i]);
}
@ -372,10 +316,7 @@ void MultiFrameCapture::configFPGAParam(int mode, int dpi)
// //video->HtCamReadADCReg_ALL(i);
// }
};
#include "bmp.h"
void MultiFrameCapture::snaprun()
{
//frame_info 发送得数据信息 channels 图像位深 num 需要取得帧数 time_out读图超时时间设置
@ -384,38 +325,36 @@ void MultiFrameCapture::snaprun()
StopWatch sw;
sw.reset();
unsigned char *data = NULL;
//printf("设置超时时间：%d\r\n",time_out);
int ret = video->HtCamReadCaptureFrame((void **)&data, time_out);
int t = resolution_ == DPI_600 ? sw.elapsed_ms() + 600 : sw.elapsed_ms() + 20;
time_out = t;
uint32_t sendLine = video->HtCamReadFpgaRegs(0x000e);////0x000e 取出来的实际行数
printf("--------------fpga send line ------------:%d\r\n",sendLine);
if (data)
{
//cv::Mat mat = cv::Mat(info_ex.height, info_ex.width, CV_8UC1, data, cv::Mat::AUTO_STEP);
// printf("获取数据 width:%d height:%d \r\n",info_ex.width,info_ex.height);
//cv::imwrite("/home/root/test+_" + to_string(i)+".bmp", mat);
// printf("--------------frame_index------------:%d\r\n",frame_index);
if (i == 2)
{
// cv::imwrite("/home/root/test.bmp", mat);
//cv::imwrite("/home/root/test.bmp", mat);
//savebitmap(data,15552,512,"1.bmp");
}
//info_ex.mat = mat.clone();
//JpegCompress cmp(90);
//HG_JpegCompressInfo info = cmp.GetCompressedImg(mat);
if (i == 1)
{
uint32_t cnt = 25;
if (paper_size_ != (unsigned int)PaperSize::G400_MAXSIZE && !is_remove_morr_)
{
int val = resolution_ == 3 ? 600 :(resolution_ == 2?300:200);
cnt = compute_frame((unsigned int)PaperSize::G400_AUTO , val) ;
cnt *=sw.elapsed_ms();
}
else
cnt = (info_ex.frame_index + 1) * sw.elapsed_ms();
image_cb_(cnt);
img_wait_.notify_all();
// cv::imwrite("/home/root/test.bmp", mat);
//cv::imwrite("/home/root/test.bmp", mat);
//savebitmap(data,15552,512,"1.bmp");
}
HG_JpegCompressInfo info ;
info.pJpegData = data;
info.dpi = false ;
info.dpi = resolution_ ;
info.DataLength = info_ex.width * info_ex.height;
info.first_frame = info_ex.first_frame;
info.last_frame = info_ex.last_frame;
@ -426,8 +365,6 @@ void MultiFrameCapture::snaprun()
//printf("获取数据 width:%d height:%d is_first:%d is_last:%d DataLength:%d\r\n",info_ex.width,info_ex.height,info.first_frame,info.last_frame,info.DataLength);
m_glue.m_imageready(info);
//m_frameinfos.Put(info_ex);
printf("采集图像耗时：%f\r\n",sw.elapsed_ms());
}
return ret;
@ -437,9 +374,7 @@ void MultiFrameCapture::snaprun()
while (b_snap_run)
{
std::unique_lock<std::mutex> lock(m_mtx_snap);
m_cv_snap_is_scaning = false;
m_cv_snap.wait(lock);
m_cv_snap_is_scaning = true;
V4L2_DATAINFO_Ex frame_info_;
frame_info_.pixtype = color_mode_;
@ -459,10 +394,6 @@ void MultiFrameCapture::snaprun()
{
time_out = 2000;
}
int time_out_cnt = 0;
if (color_mode_)
{
time_out += 400;
@ -481,9 +412,7 @@ void MultiFrameCapture::snaprun()
// video->HtCamSetStSp(ti);
// printf("设置 StSp%d\r\n",ti);
// ti++;
int mill = 0; //= resolution_ == DPI_600 ? 30 : 25;
//mill = color_mode == 1?mill*3:mill;
printf("mill:%d\r\n",mill);
StopWatch sw;
sw.reset();
for (size_t i = 1; i <= frame_info_.frame_index ; i++)
@ -511,20 +440,9 @@ void MultiFrameCapture::snaprun()
func_sig = snap_func(frame_info_, channels,time_out ,ind);//同上面一样
val--;
if(resolution_ == DPI_600)
{
int d = 200;
this_thread::sleep_for(std::chrono::milliseconds(d));
}
}
break;
}
if(m_config.params.dpi == 3)
{
int d = 200;
this_thread::sleep_for(std::chrono::milliseconds(d));
}
}
}
uint32_t in=0;
@ -536,17 +454,14 @@ void MultiFrameCapture::snaprun()
b_end_snap = true;
}
}
void MultiFrameCapture::updatesnapstatus(int papertype)
{
b_stop_snap = false;
}
void MultiFrameCapture::procimage()
{
}
static int temp_val = 0;
#define CIS_6CH
bool MultiFrameCapture::saveLutImg(int dpi, int mode, bool black)
{
@ -586,17 +501,7 @@ bool MultiFrameCapture::saveLutImg(int dpi, int mode, bool black)
CImageMerge t_marge;
cv::Mat mrgmat = t_marge.MergeImage(src, dstwidth, height, mode,true);
printf("mrgmat width = %d height = %d temp_val=%d\n", mrgmat.cols, mrgmat.rows,temp_val);
int inx = 0;
if (temp_val == 0 && !black)
{
//inx+=1;
//temp_val++;
//imwrite(to_string(inx) + ".bmp", mrgmat);
}
//return 0;
printf("mrgmat width = %d height = %d \n", mrgmat.cols, mrgmat.rows);
FPGAConfigParam param = GetFpgaparam(dpi, mode);
if (black) // 暗场
@ -752,12 +657,12 @@ bool MultiFrameCapture::saveLutImg(int dpi, int mode, bool black)
// else
// diff = 240 - *((double *)values + k);
int diff;
if (x==0)
{
diff = 130 - *((double *)values + k); //R曝光值拉低
}
else
diff = 240 - *((double *)values + k);
// if (x==0)
// {
// diff = 170 - *((double *)values + k); //R曝光值拉低
// }
// else
diff = 200 - *((double *)values + k);
log += " 明场:" + std::to_string(k) + ";diff：" + std::to_string(diff) + "\r\n";
@ -890,7 +795,6 @@ bool MultiFrameCapture::saveLutImg(int dpi, int mode, bool black)
printf("exit Save_lut \n");
return isNeedSave;
}
void MultiFrameCapture::formatStep()
{
for (int i = 0; i < 2; i++)
@ -903,7 +807,6 @@ void MultiFrameCapture::formatStep()
for (int i = 0; i < 12; i++)
offsetStep[i] = 64;
}
void MultiFrameCapture::correctcolor(int correctmode)
{
StopWatch sw_correct;
@ -978,7 +881,6 @@ void MultiFrameCapture::correctcolor(int correctmode)
if (m_glue.m_deviceevent)
m_glue.m_deviceevent((int)HG_ScannerStatus::AUTO_FLAT_FINISHED, "******Correct Done times = " + to_string(sw_correct.elapsed_s()) + " ****** \r\n");
}
void MultiFrameCapture::openDevice(int dpi, int mode)
{
bool dunnancis = true;
@ -1046,7 +948,6 @@ void MultiFrameCapture::openDevice(int dpi, int mode)
printf("opened video with width = %d height = %d time eplased = %.2f pbuffer = %p \n", width, 60 * 2, swwv4l2open.elapsed_ms(),buf);
}
void MultiFrameCapture::creatcorrectconfig(int dpi, int mode)
{
openDevice(dpi, mode);
@ -1109,4 +1010,12 @@ void MultiFrameCapture::creatcorrectconfig(int dpi, int mode)
//creatLUTData(dpi, mode);
video->close_device();
}
void MultiFrameCapture::set_image_callback(image_callback cb)
{
image_cb_ = cb;
}
void MultiFrameCapture::wait_image_notify()
{
std::unique_lock<std::mutex> lock(img_lock_);
img_wait_.wait(lock);
}

38
zynq_7010_code/MultiFrameCapture.h
View File

@ -26,43 +26,33 @@ typedef struct hg_tag_SIZE
typedef CSSIZE SIZE;
class MultiFrameCapture : public ICapturer
{
private:
int frame_height = 60;
int m_total_height = 0;
int readframe_timeout = 100;
unsigned int frame_count;
BlockingQueue<V4L2_DATAINFO_Ex> m_frameinfos;
bool b_snap_run;
bool b_stop_snap;
bool stop_snap_ = false ;
bool b_end_snap;
bool b_imgproc;
bool is_size_error;
bool bScanning;
std::atomic<int> iImageremain;
FPGAConfigParam m_fpgaparam;
std::mutex m_mtx_snap;
std::mutex m_mtx_snapdone;
std::mutex img_lock_;
std::condition_variable img_wait_;
std::condition_variable m_cv_snap;
bool m_cv_snap_is_scaning;
std::condition_variable m_cv_snapdone;
std::shared_ptr<std::thread> m_snap_thread;
std::shared_ptr<std::thread> m_imgproc_thread;
std::thread m_correctThread;
ScannerGlue m_glue;
int offsetStep[12];
int expStep[2][3];
double radio = 1;
#ifdef TEST_SIMCAP
unsigned char* m_test_pimg;
unsigned int m_test_pimg_len;
#endif
CamZ_Reg_4 reg_;
private:
void configFPGAParam(int mode,int dpi);
void snaprun();
@ -75,22 +65,17 @@ private:
void openDevice(int dpi,int mode);
private:
unsigned int resolution_; // 分辨率 //3:600dpi 2:300dpi 1:200dpi
unsigned int v4l2_width_; // v4l2 图像宽
unsigned int v4l2_height_; // v4l2 图像高
unsigned int pixels_height_; // opencv需要生成的高
unsigned int pixels_width_ ; // opencv需要生成的宽
unsigned int fpga_height_; // PGPA 需要的高的是三倍数 ，发950 就是指951
unsigned int paper_size_; // 纸张大小
unsigned int color_mode_; // 颜色模式
unsigned int is_correct_; // 是否校正
unsigned int is_double_paper_; // 是否启动双张检测
unsigned int is_remove_morr_; // 去除摩尔纹
unsigned int is_remove_morr_; // 去除摩尔纹
cv::Mat lut;
std::map<PaperSize, SIZE> paper_map_
{
@ -113,13 +98,10 @@ private:
SIZE GetPaperSize(PaperSize paper, int dpi);
uint32_t compute_frame(int paper_size,int dpi); //计算固定幅面需要采集的帧数
void compute_height(int width,int height); //在open 之前调用
public:
public:
MultiFrameCapture(ScannerGlue glue);
virtual ~MultiFrameCapture();
public:
virtual void SetParent(void *scanner) override;
virtual void open() override;
@ -161,4 +143,8 @@ public:
virtual void setScanFlag(bool brun) override;
virtual void SetLowPower(bool islow);
virtual void set_image_callback(image_callback cb) override;
virtual void wait_image_notify() override;
};

95
zynq_7010_code/PropertiesUtils.cpp
View File

@ -1,95 +0,0 @@
/*
* Copyright (c) 2014 Fredy Wijaya
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in all
* copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "PropertiesUtils.h"
namespace cppproperties {
namespace PropertiesUtils {
namespace {
const std::string TRIM_DELIMITERS = " \f\n\r\t\v";
std::string ltrim(const std::string& str) {
std::string::size_type s = str.find_first_not_of(TRIM_DELIMITERS);
if (s == std::string::npos) {
return "";
}
return str.substr(s);
}
}
std::string RightTrim(const std::string& str) {
std::string::size_type s = str.find_last_not_of(TRIM_DELIMITERS);
if (s == std::string::npos) {
return "";
}
return str.substr(0, s+1);
}
std::string LeftTrim(const std::string& str) {
std::string rstr = ltrim(str);
while (rstr != ltrim(rstr)) {
rstr = ltrim(rstr);
}
return rstr;
}
std::string Trim(const std::string& str) {
return RightTrim(LeftTrim(str));
}
bool IsProperty(const std::string& str) {
std::string trimmedStr = LeftTrim(str);
std::string::size_type s = trimmedStr.find_first_of("=");
if (s == std::string::npos) {
return false;
}
std::string key = Trim(trimmedStr.substr(0, s));
// key can't be empty
if (key == "") {
return false;
}
return true;
}
std::pair<std::string, std::string> ParseProperty(const std::string& str) {
std::string trimmedStr = LeftTrim(str);
std::string::size_type s = trimmedStr.find_first_of("=");
std::string key = Trim(trimmedStr.substr(0, s));
std::string value = LeftTrim(trimmedStr.substr(s+1));
return std::pair<std::string, std::string>(key, value);
}
bool IsComment(const std::string& str) {
std::string trimmedStr = LeftTrim(str);
return trimmedStr[0] == '#';
}
bool IsEmptyLine(const std::string& str) {
std::string trimmedStr = LeftTrim(str);
return trimmedStr == "";
}
} // namespace PropertiesUtils
} // namespace cppproperties

55
zynq_7010_code/PropertiesUtils.h
View File

@ -1,55 +0,0 @@
#ifndef PROPERTIESUTILS_H_
#define PROPERTIESUTILS_H_
#include <string>
#include <utility>
namespace cppproperties {
namespace PropertiesUtils {
/**
* Left trims a string.
* This function doesn't modify the given str.
*/
std::string LeftTrim(const std::string& str);
/**
* Right trims a string.
* This function doesn't modify the given str.
*/
std::string RightTrim(const std::string& str);
/**
* Trims a string (perform a left and right trims).
* This function doesn't modify the given str.
*/
std::string Trim(const std::string& str);
/**
* Is a given string a property. A property must have the following format:
* key=value
*/
bool IsProperty(const std::string& str);
/**
* Parses a given property into a pair of key and value.
*
* ParseProperty assumes a given string has a correct format.
*/
std::pair<std::string, std::string> ParseProperty(const std::string& str);
/**
* Is a given string a comment? A comment starts with #
*/
bool IsComment(const std::string& str);
/**
* Is a given string empty?
*/
bool IsEmptyLine(const std::string& str);
} // namespace PropertiesUtils
} // namespace cppproperties
#endif /* PROPERTIESUTILS_H_ */

142
zynq_7010_code/Scanner.cpp
View File

@ -1,10 +1,10 @@
#include "Scanner.h"
#include <iostream>
#include "filetools.h"
#include "MemoryInfo.h"
#include "SysInforTool.h"
#include "USBProtocol.h"
#include "StopWatch.h"
#define BTN_START 0
#define BTN_STOP 1 //按键停止扫描
@ -24,11 +24,13 @@ Scanner::Scanner(ScannerGlue glue)
waitpapertime(200),
m_scansysinfo(nullptr)
{
frame_time_ = 3000;
m_scaninfo = GetScanInfoFromJson();
capturer.reset(new MultiFrameCapture(m_glue));
capturer->SetParent(this);
capturer->set_image_callback(&have_img_callback);
this_thread::sleep_for(std::chrono::milliseconds(50));
//固件版本
int version=7010;
@ -114,6 +116,15 @@ void Scanner::updateSpeedMode()
motorZouzhi.speedChange(sp, t_dpi,m_config.params.isColor);
}
void Scanner::have_img_callback(int val)
{
if (val < 0)
{
frame_time_ = 3000;
}
frame_time_ = val ;
}
void Scanner::startScan()
{
if (threadRunScan.joinable())
@ -147,18 +158,18 @@ void Scanner::processevent(FsmState *fsmState, ScanEvent event)
//开盖模式：1 扫描中开盖 2 未扫描的时候开盖 ，目前我想不到更好的方法，暂时先这样处理
if (event == S_EVT_COVER_OPENED && isScaning)
{
//printf("回调：开盖\r\n");
//printf("回调：开盖1111\r\n");
m_glue.m_deviceevent(1, "Cover Open");
}
else if (typeid(*fsmState) == typeid(CoverOpenState) && !isScaning)
{
//printf("回调：开盖\r\n");
//printf("回调：开盖2222\r\n");
m_glue.m_deviceevent(1, "Cover Open");
}
else if (event == S_EVT_SCAN_STOPPED)
{
//printf("回调：停止\r\n");
//printf("回调：停止1111\r\n");
if (!m_correctting)
{
m_glue.m_deviceevent(70, "Scan done");
@ -166,7 +177,7 @@ void Scanner::processevent(FsmState *fsmState, ScanEvent event)
}
else if (event == S_EVT_JAM_IN)
{
//printf("回调：搓纸失败\r\n");
//printf("回调：搓纸失败11111\r\n");
m_glue.m_deviceevent(4, "Feed error");
}
else if (event == S_EVT_DOUBLEPAPER)
@ -183,7 +194,7 @@ void Scanner::processevent(FsmState *fsmState, ScanEvent event)
else if (typeid(*fsmState) == typeid(ErrorState) && m_jamIn == true)
{
//printf("回调：搓纸失败\r\n");
//printf("回调：搓纸失败22222\r\n");
m_glue.m_deviceevent(4, "Feed error");
}
if (!IsScanning() && (typeid(*fsmState) == typeid(ErrorJamState) ||
@ -192,7 +203,7 @@ void Scanner::processevent(FsmState *fsmState, ScanEvent event)
{
if (!m_correctting)
{
//printf("回调：停止\r\n");
//printf("回调：停止2222\r\n");
m_glue.m_deviceevent(70, "Scan Stop");
}
}
@ -215,7 +226,6 @@ void Scanner::runScan()
sensor->resetPaperPin();
capturer->clearimages();
capturer->resetimageremain();
capturer->setScanFlag(true);
@ -224,7 +234,6 @@ void Scanner::runScan()
m_config.params.pageSize==(int)PaperSize::G400_MAXSIZE;
StopWatch sw;
StopWatch sw1;
isScaning = true;
int error_code = 0;
while (m_DstScannum > 0)
@ -239,7 +248,6 @@ void Scanner::runScan()
if (!sensor->waitPaperStandBy(0))
{
put(S_EVT_STOP_SCAN);
LOG("STOP STOP STOP RUNSCAN \n");
}
isScaning = false;
break;
@ -265,7 +273,6 @@ void Scanner::runScan()
{
if (!m_isDoublePaper)
{
m_glue.m_deviceevent(4, "Feed error");
m_jamIn = true;
put(S_EVT_JAM_IN);
m_scaninfo.JamInNum++;
@ -276,128 +283,54 @@ void Scanner::runScan()
printf("检测到纸张的时间：%f\r\n",sw.elapsed_ms());//检测到纸张
capturer->snap();
motorCuozhi.pauseWaitForThread();
int i = 0;
int max = 7;
capturer->wait_image_notify();
if(m_config.params.pageSize >= (int)PaperSize::G400_LONGLETTER)
max = m_scaninfo.SpeedMode > 3 ? 10 : 25;
else
max = m_scaninfo.SpeedMode > 3 ? 5 : 8;
max = m_config.params.dpi > 2 ? 30 : max * m_config.params.dpi;
if(m_config.params.pageSize == 17 || m_config.params.pageSize == 19 || m_config.params.slow_moire)
{
max = 200;
}
waitpapertime = 200;
while (!sensor->waitPaperOut(waitpapertime) && i < max)
{
//printf("max :%d i:%d\r\n",max,i);
i++;
if (!sensor->isPaperIn())
{
printf("paper 假卡纸了。。。。。\n");
isScaning = false;
break;
}
}
if (!sensor->isCoverClosed())
if (!sensor->isCoverClosed()) //中途开盖 笑麻了
{
break;
}
if (i == max && sensor->isPaperIn())
{
printf("frame_time_:%d\r\n",frame_time_);
if (sensor->waitPaperOut(frame_time_))
{
if (!m_isDoublePaper)
{
error_code = S_EVT_JAM_OUT;
m_glue.m_deviceevent(8, "Jam out"); //卡纸
error_code = (int)HG_ScannerStatus::PAPER_JAM;
m_jamPaper = true;
put(S_EVT_JAM_OUT);
m_scaninfo.JamOutNum++;
printf("paper 卡纸了。。。。。\n");
}
else
{
// m_glue.m_deviceevent(16); //双张
// LOG("paper 双张了。。。。。\n");
m_scaninfo.DoubleNum++;
}
capturer->waitsnapdone(error_code);//等待采集完成
this_thread::sleep_for(std::chrono::milliseconds(500));//200 80ms 600 260ms
isScaning = false;
break;
}
//LOG("\nclose double sensor %s\n",GetCurrentTimeStamp(2).c_str());
sensor->enableDoubleSensor(false);
if(b_autosize)
{
int dly_speed= (5 - m_scaninfo.SpeedMode)*10;
int delay = m_config.params.dpi==0x02?70:(m_config.params.dpi==0x03?350: 20);
if((m_config.params.pageSize == 17 || m_config.params.pageSize == 19)&&(delay < 350))
{
delay = 350;
}
if(m_config.params.pageSize == 18)
delay = std::max(delay,80);
delay += dly_speed;
if (m_config.params.dpi == 3)
{
delay = 0;
}
this_thread::sleep_for(std::chrono::milliseconds(delay));//200 80ms 600 260ms
}
if(b_autosize)
{
int de = (5 - m_scaninfo.SpeedMode) * 10 * m_config.params.dpi;
if (de == 3)
{
de = 0;
}
std::this_thread::sleep_for(std::chrono::milliseconds(de));
if(sensor->isPaperAtScan())
{
m_glue.m_deviceevent((int)HG_ScannerStatus::PAPER_HOLE,"paper have hole");
capturer->waitsnapdone((int)HG_ScannerStatus::PAPER_HOLE);//等待采集完成
isScaning = false;
break;
}
}
sensor->enableDoubleSensor(false);
capturer->stopsnap(b_autosize);
error_code = m_isDoublePaper ? S_EVT_DOUBLEPAPER : m_jamPaper ? S_EVT_JAM_OUT :0;
error_code = m_isDoublePaper ? (int)HG_ScannerStatus::DETECT_DOUBLE_FEED : m_jamPaper ? (int)HG_ScannerStatus::PAPER_JAM :0;
capturer->waitsnapdone(error_code);//等待采集完成
m_DstScannum--;
m_scaninfo.RollerNum++;
m_scaninfo.TotalScanned++;
if (m_DstScannum == 0)
{
this_thread::sleep_for(std::chrono::milliseconds(200));
put(S_EVT_STOP_SCAN);
isScaning = false;
break;
}
sw.reset();
while (meminfo->GetMemoryUsed() > 90.0f||(m_config.params.dpi ==0x03 && capturer->getimageremain()>1)) //内存占用高于75%
while (meminfo->GetMemoryUsed() > 90.0f||(m_config.params.dpi ==0x03 && capturer->getimageremain()>1)) //内存占用高于75% 其实我觉得开发人员应该自己控制好这个内存大小，让他绝对不可能超过这个内存大小
{
if (sw.elapsed_s() < 50.0)
{
std::this_thread::yield();
}
std::this_thread::yield();
else
{
put(S_EVT_STOP_SCAN);
@ -409,6 +342,7 @@ void Scanner::runScan()
printf("一张纸完成时间：%f\r\n",sw1.elapsed_ms());
if( m_config.params.dpi == 3)
this_thread::sleep_for(std::chrono::milliseconds(3000));
}
isScaning = false;
m_DstScannum = 0;
@ -417,13 +351,11 @@ void Scanner::runScan()
capturer->setScanFlag(false);
capturer->stopsnap(b_autosize);
int t_delay = m_config.params.dpi == 0x02 ? 150 : (m_config.params.dpi == 0x03 ? 350 : 100);
int t_delay = 500;//b_autosize ?350 : 200;
//int t_delay = m_config.params.dpi == 0x02 ? 150 : (m_config.params.dpi == 0x03 ? 350 : 100);
this_thread::sleep_for(std::chrono::milliseconds(t_delay)); //走纸多转一会儿 确保扫描传感器过了之后 纸能出完
capturer->setFanMode(0);
LOG("\n--------------------------scan done --------------------------------\n");
}
@ -475,10 +407,6 @@ void Scanner::emergency_stop(int id)
sensor->cancelWaitPaper();
sensor->enableDoubleSensor(false);
m_DstScannum = 0;
if (id == S_EVT_ERROR_DOUBLEPAPER) //双张
m_glue.m_deviceevent(S_EVT_ERROR_DOUBLEPAPER, "double feed");
// else if(id == S_EVT_COVER_OPENED)
// m_glue.m_deviceevent(S_EVT_COVER_OPENED, "cover opened");
motorCuozhi.stop();
motorZouzhi.stop();
@ -495,8 +423,10 @@ void Scanner::stop_scan()
sensor->cancelWaitPaper();
sensor->enableDoubleSensor(false);
m_DstScannum = 0;
if (threadRunScan.joinable())
threadRunScan.join();
motorZouzhi.stop();
motorCuozhi.stop();

10
zynq_7010_code/Scanner.h
View File

@ -13,16 +13,19 @@
#include "scanservices_utils.h"
#include "Keyboard.h"
#include "utilsfunc.h"
#include "filetools.h"
#include "SysInforTool.h"
#include "MotorConfig.h"
#include "correct_ultis.h"
class ICapturer;
class MemoryInfo;
// class SysInforTool;
static int frame_time_ ;
class Scanner
{
std::mutex cb_lock_;
std::condition_variable wait_cb_;
public:
bool isRested = false;
bool isScaning = false;
@ -38,6 +41,7 @@ public:
void CreatCorrectData(int correctmode);
void UpdateScanInfo();
void updateSpeedMode();
static void have_img_callback(int val);
std::string GetSysInfo();
public:
@ -55,7 +59,7 @@ public:
inline bool GetIsJamPaper() { return m_jamPaper; }
inline bool GetIsJamIn() { return m_jamIn; }
inline void ResetJamIn() { m_jamIn = false; }
inline bool IsScanning() { return !capturer->IsImageQueueEmpty(); }
inline bool IsScanning() { return isScaning; }
inline void close_v4l2() { capturer->close(); }
CaptureParams GetCaptureParams()

17
zynq_7010_code/Sensor.cpp
View File

@ -7,7 +7,8 @@
#include <vector>
#include <iostream>
#include <stdio.h>
#include "filetools.h"
#include "StopWatch.h"
//FileTools ftt("/home/linaro/scanpin.log");
@ -103,13 +104,8 @@ bool Sensor::waitPaperIn(int timeout_ms)
bool Sensor::waitPaperOut(int timeout_ms)
{
std::unique_lock<std::mutex> lck(cv_m);
if (!isPaperIn())
{
LOG("scanPin Value is low! \n");
return true;
}
cv_scan_not_at.wait_for(lck, std::chrono::milliseconds(timeout_ms)) == std::cv_status::no_timeout;
return !isPaperIn();
return isPaperIn();
}
bool Sensor::waitPaperStandBy(int timeout_ms)
@ -150,6 +146,7 @@ void Sensor::monitor()
num = read(pfd.fd, buf, 8); // This is to clear the avaible read
std::cout<<"read time "<< sw.elapsed_ms()<<std::endl;
int indx = 0;
bool b = false;
while (bMonitor)
{
ret = poll(&pfd, 1, 1000);
@ -182,7 +179,7 @@ void Sensor::monitor()
num = read(pfd.fd, buf, 8);
buf[num - 1] = '\0';
ret = atoi(buf);
bool b = false;
if (ret)
{
@ -198,8 +195,10 @@ void Sensor::monitor()
{
printf("没有检测到纸张进入\r\n");
continue;
}
}
b = false;
}
edges[ret]->notify_all();
sw.reset();

224
zynq_7010_code/USBProtocol.h
View File

@ -1,225 +1 @@
#pragma once
typedef struct
{
int Command;
int Data;
int Length;
} USBCB;
enum class USBCommand : unsigned int
{
//无命令
NO_COMMAND = 0,
//获取dsp 状态
GET_DSP_STATUS = 1,
//取图
GET_IMAGE = 2,
//销毁DSP中驻存的图
POP_IMAGE = 3,
//开始扫描命令
START_COMMAND = 4,
//停止扫描命令
STOP = 5,
//获取扫描仪扫描模式
GET_SCAN_MODE = 6,
//获取固件版本号
GET_FW_VERSION = 7,
//返回PC端的状态
SEND_STATUS_PC = 8,
//下发扫描配置参数
CONFIGURED_DATA = 9,
//下发固件信息
SEND_FW = 10,
//获取扫描参数
GET_CONFIG_DATA = 11,
//获取扫描总张数
GET_SCANN_NUM = 12,
//获取有无纸的状态
GET_PAPERFEEDER_STATUS = 13,
//DSP初始化
INIT_HARDWARE_SYS = 14,
//下发元器件配置参数（灰度，LED R曝光时间）
SEND_COMPONENTS_GR = 15,
//下发元器件配置参数（LED G/B曝光时间）
SEND_COMPONENTS_GB = 16,
//下发扫描模式
SEND_SCAN_MODE = 17,
//开始进行平场矫正
START_FLAT = 18,
//停止平场矫正
STOP_FLAT = 19,
//下发200dpi彩色平场矫正参数
SEND_200_COLOR_FLAT_DATA = 20,
//下发300dpi彩色平场矫正参数
SEND_300_COLOR_FLAT_DATA = 21,
//获取200dpi彩色平场矫正参数
GET_200_COLOR_FLAT_DATA = 22,
//获取300dpi彩色平场矫正参数
GET_300_COLOR_FLAT_DATA = 23,
//下发200dpi灰度平场校正参数
SEND_200_GRAY_FLAT_DATA = 24,
//下发300dpi灰度平场校正参数
SEND_300_GRAY_FLAT_DATA = 25,
//获取200DPI灰度平场校正参数
GET_200_GRAY_FLAT_DATA = 26,
//获取300DPI灰度平场校正参数
GET_300_GRAY_FLAT_DATA = 27,
//下发序列号命令
SEND_SERIAL = 28,
//获取序列号命令
GET_SERIAL = 29,
//获取滚轴数
GET_ROLLER_NUM = 0x1e,
//清零滚轴数
CLR_ROLLER_NUM = 0x1f,
//清除扫描总张数
CLR_SCAN_NUM = 0x20,
//准备更新固件
PRE_UPGRADE = 0X21,
//开始更新固件
START_UPGRADE = 0x22,
//彩色的AD参数
RGB_ADI_PARA = 0x23,
//灰度的AD参数
ADI_PARA = 0x24,
//获取CIS参数（曝光时间，ad参数)
GET_CIS_PARA = 0x25,
//扫描张数
START_COMMAND_COUNT = 0x26,
//下发休眠时间
SET_SLEEP_TIME = 0x27,
//获取休眠时间
GET_SLEEP_TIME = 0x28,
//清除缓存
CLR_CACHE = 0x29,
//下发速度模式
SET_SPEED_MODE = 0x2a,
//获取扫描速度模式
GET_SPEED_MODE = 0X2b,
//设置固件版本一共8个字节
SET_FW_VERSION = 0X2c,
//获取DSP版本
GET_DSP_VERSION = 0X2d,
//采集板FPGA固件版本
GET_SCANFPGA_VERSION = 0x2e,
//电机板FPGA固件版本
GET_MOTORFPGA_VERSION = 0X2f,
//设置制造商信息
SET_USB_INFOR_MANUFACTURE = 0X30,
//获取制造商信息
GET_USB_INFOR_MANUFACTURE = 0X31,
//设置产品型号信息
SET_USB_INFOR_MODEL_NAME = 0X32,
//获取产品型号信息
GET_USB_INFOR_MODEL_NAME = 0X33,
//设置USB PID / VID信息
SET_USB_INFOR_VIDPID = 0X34,
GET_USB_INFOR_VIDPID = 0X35,
//设置卡纸急停检测灵敏度
SET_JAM_DETECT_SENSITIVE = 0X36,
//获取卡纸急停检测灵敏度
GET_JAM_DETECT_SENSITIVE = 0X37,
//设置横向畸变系数
SET_JUST_COF_H = 0x38,
//读取横向畸变系数
GET_JUST_COF_H = 0x39,
//G400 清除硬件异常
CLEAR_HWERROR = 0x40,
//设置纵向畸变系数
SET_JUST_COF_V = 0x41,
//读取纵向畸变系数
GET_JUST_COF_V = 0x42,
//设置彩色校正参数
SEND_COLOR_FLAT = 0x43,
//设置彩色平场校正参数
SEND_COLORCORRECT_FLAT = 0x44,
//设置灰度校正参数
SEND_GRAY_FLAT = 0x45,
//设置灰度平场校正参数
SEND_GRAYCORRECT_FLAT = 0x46,
//设置平场校正参数
GET_FLAT_DATA =0x47,
//更新完成
UPDATE_FINISHED = 0x48,
//重启
REBOOT = 0x49,
//获取日志
GET_LOG_FILES_INFO = 0x50,
//发送log文件完成
GET_UPDATE_RESULT=0x51,
//清空日志
CLEAR_LOG_FILES = 0x52,
//获取搓纸失败
GET_CUO_ERROR,
//获取双张失败次数
GET_DOU_ERROR,
//获取卡纸次数
GET_JAM_ERROR,
ACTIVE_SCANNER=0x100,
//图像处理参数下发
GETSYSINFO_LEN =0x200,
GETSYSINFO =0x201,
GETMOTORPARAM = 0x202,
GETMOTORPARMLEN=0x203,
SETMOTORPARAM = 0x204,
SETMOTORPARAMLEN = 0x205,
DEVICES_7010 = 0x7010
};
enum class HG_ScannerStatus
{
//异常
HAVE_ERROR = -1,
//正常状态
NORMAL = 0,
//开盖
OPEN_COVER = 1,
// 无纸
NO_FEED = 2,
// 搓纸失败
FEED_IN_ERROR = 4,
// 卡纸
PAPER_JAM = 8,
// 检测到双张
DETECT_DOUBLE_FEED = 16,
// 检测到订书钉
DETECT_STAPLE = 32,
// 纸张倾斜
PAPER_SKEW = 64,
// 自动模式
AUTO_SCAN_MODE = 65,
// 手动模式
MANAUL_SCAN_MODE = 66,
// 计数模式
COUNT_MODE = 67,
// 硬件错误
HARDWARE_ERROR = 68,
// FPGA崩溃
FPGA_ERROR = 68,
// 开始
START_SCAN = 69,
//停止
STOP_SCAN = 70,
//有图
HAVE_IMAGE = 71,
// 更新扫描参数
UPDATE_SCAN_PARAMETER = 72,
// PC繁忙或出错
PC_SCAN_BUSY_or_ERROR = 73,
// 更新完成
UPDATE_FINISHED = 74,
//尺寸检测错误
SIZE_ERROR=75,
//纸张有孔
PAPER_HOLE = 84,
//自动校正中
AUTO_FLATTING=198,
//USB 未连接
USB_DISCONNECTED = 200,
//用户点击停止
USER_STOP = 201,
//自动平场校正完成
AUTO_FLAT_FINISHED = 202,
SCANNER_ACTIVED=0x10
};

36
zynq_7010_code/UsbScanner.cpp
View File

@ -2,9 +2,9 @@
#include <turbojpeg.h>
#include "JsonConfig.h"
#include "USBProtocol.h"
#include "filetools.h"
#include "logs_out.h"
#include "JsonConfig.h"
#include "StopWatch.h"
#define USB_REQ_GET_FPGA_REGS 0x40
#define USB_REQ_SET_FPGA_REGS 0x41
@ -138,22 +138,22 @@ UsbScanner::UsbScanner() : m_startscan(false),
auto deviceevent = [this](const int eventID, std::string capmsg)
{
printf("插入事件:%d\r\n",eventID);
eventsramain++;
m_scannerEvents.Put({eventID, capmsg});
if (eventID == (int)HG_ScannerStatus::STOP_SCAN)
{
eventsramain++;
m_scannerEvents.Put({eventID, capmsg});
if (eventID == (int)HG_ScannerStatus::STOP_SCAN)
{
m_startscan = false;
}
if (eventID == (int)(HG_ScannerStatus::AUTO_FLAT_FINISHED))
{
m_hgScanner->ResetCorrectflags();
}
else if ((eventID == (int)HG_ScannerStatus::SIZE_ERROR) || (eventID == (int)HG_ScannerStatus::PAPER_HOLE))
{
m_hgScanner->StopScan(0);
}
m_startscan = false;
}
if (eventID == (int)(HG_ScannerStatus::AUTO_FLAT_FINISHED))
{
m_hgScanner->ResetCorrectflags();
}
else if ((eventID == (int)HG_ScannerStatus::SIZE_ERROR) || (eventID == (int)HG_ScannerStatus::PAPER_HOLE))
{
m_hgScanner->StopScan(0);
}
};
ScannerGlue glue = {imageready, deviceevent};
m_hgScanner.reset(new Scanner(glue));
@ -299,7 +299,7 @@ bool UsbScanner::GetImagequeueEmpty()
{
if (m_images.Size() != 0)
{
LOG("队列剩余图像帧数：%d\r\n",m_images.Size());
printf("队列剩余图像帧数：%d\r\n",m_images.Size());
}
return m_images.Size() == 0;
@ -443,7 +443,7 @@ std::string UsbScanner::GetSysInfo()
return m_hgScanner->GetSysInfo();
}
int UsbScanner::read_bulk(void *pdata, int length)
int UsbScanner::read_bulk(void *pdata, int length ,int time)
{
int ret=0;
@ -452,7 +452,7 @@ int UsbScanner::read_bulk(void *pdata, int length)
if(m_usb.get()&& m_usb->is_connected())
{
ret = m_usb->read_bulk(pdata,length,1000);
ret = m_usb->read_bulk(pdata,length,time);
}
return ret;
}

2
zynq_7010_code/UsbScanner.h
View File

@ -44,7 +44,7 @@ public:
virtual void close_v4l2()override;
std::string GetSysInfo();
int read_bulk(void *pdata, int length);
int read_bulk(void *pdata, int length,int time = 1000);
int write_bulk(void *pdata, int length);
bool is_connect();
private:

158
zynq_7010_code/filetools.h
View File

@ -1,158 +0,0 @@
#pragma once
#include <vector>
#include <iostream>
#include <fstream>
#include <time.h>
#include <sstream>
#include <chrono>
#include <sys/timeb.h>
#include <chrono>
#include <iostream>
#include <ctime>
class FileTools
{
private:
std::string mPath;
public:
FileTools(std::string path)
{
mPath = path;
}
void createLog(std::string log)
{
time_t now = time(0);
tm *ltm = localtime(&now);
char loc_date[30];
sprintf(loc_date, "%d%02d%02d %d:%d:%d", 1900 + ltm->tm_year, 1 + ltm->tm_mon, ltm->tm_mday, ltm->tm_hour, ltm->tm_min, ltm->tm_sec);
std::ofstream ofs(mPath);
ofs << loc_date << ": " << log << std::endl;
ofs.close();
}
void append_log(std::string log, bool printTime = true)
{
std::ofstream ofs(mPath, std::ios::app);
if (printTime)
{
// time_t now = time(0);
// struct timeb stTimeb;
// ftime(&stTimeb);
// tm *ltm = localtime(&now);
// char loc_date[30];
// sprintf(loc_date, "%d%02d%02d %d:%d:%d", 1900 + ltm->tm_year, 1 + ltm->tm_mon, ltm->tm_mday, ltm->tm_hour, ltm->tm_min, ltm->tm_sec);
struct tm *ptm;
struct timeb stTimeb;
static char loc_date[30];
ftime(&stTimeb);
ptm = localtime(&stTimeb.time);
sprintf(loc_date, "%02d-%02d %02d:%02d:%02d.%03d",
ptm->tm_mon + 1, ptm->tm_mday, ptm->tm_hour, ptm->tm_min, ptm->tm_sec, stTimeb.millitm);
ofs << loc_date << ": " << log << std::endl;
}
else
{
ofs << " " << log << std::endl;
}
ofs.close();
}
void clear()
{
try
{
std::fstream fout(mPath, std::ios::out | std::ios::trunc);
fout.close();
}
catch (std::exception &e)
{
//LOG("error happened: %s \n", e.what());
}
}
};
static std::string GetCurrentTimeStamp(int time_stamp_type )
{
std::chrono::system_clock::time_point now = std::chrono::system_clock::now();
std::time_t now_time_t = std::chrono::system_clock::to_time_t(now);
std::tm* now_tm = std::localtime(&now_time_t);
char buffer[128];
strftime(buffer, sizeof(buffer), "%F %T", now_tm);
std::ostringstream ss;
ss.fill('0');
std::chrono::milliseconds ms;
std::chrono::microseconds cs;
std::chrono::nanoseconds ns;
switch (time_stamp_type)
{
case 0:
ss << buffer;
break;
case 1:
ms = std::chrono::duration_cast<std::chrono::milliseconds>(now.time_since_epoch()) % 1000;
ss << buffer << ":" << ms.count();
break;
case 2:
ms = std::chrono::duration_cast<std::chrono::milliseconds>(now.time_since_epoch()) % 1000;
cs = std::chrono::duration_cast<std::chrono::microseconds>(now.time_since_epoch()) % 1000000;
ss << buffer << ":" << ms.count() << ":" << cs.count() % 1000;
break;
case 3:
ms = std::chrono::duration_cast<std::chrono::milliseconds>(now.time_since_epoch()) % 1000;
cs = std::chrono::duration_cast<std::chrono::microseconds>(now.time_since_epoch()) % 1000000;
ns = std::chrono::duration_cast<std::chrono::nanoseconds>(now.time_since_epoch()) % 1000000000;
ss << buffer << ":" << ms.count() << ":" << cs.count() % 1000 << ":" << ns.count() % 1000;
break;
default:
ss << buffer;
break;
}
return ss.str();
}
class StopWatch
{
public:
StopWatch()
{
_start = std::chrono::steady_clock::now();
}
void reset()
{
_start = std::chrono::steady_clock::now();
}
double elapsed_s()
{
return std::chrono::duration<double>(std::chrono::steady_clock::now() - _start).count();
}
double elapsed_ms()
{
return std::chrono::duration<double, std::milli>(std::chrono::steady_clock::now() - _start).count();
}
double elapsed_us()
{
return std::chrono::duration<double, std::micro>(std::chrono::steady_clock::now() - _start).count();
}
double elapsed_ns()
{
return std::chrono::duration<double, std::nano>(std::chrono::steady_clock::now() - _start).count();
}
private:
std::chrono::steady_clock::time_point _start;
};

64
zynq_7010_code/main.cpp
View File

@ -8,7 +8,6 @@
#include "FsmState.h"
#include "Scanner.h"
// #include "filetools.h"
#include <sstream>
#include <stdio.h>
#include <stdlib.h>
@ -39,6 +38,9 @@ static unsigned int total_length = 0;
extern int errno;
#define MY_PID_FILE "/tmp/scanservice_pid"
#define BUF_LEN_FOR_PID 64
#define WAITCONNECTMAXTIME 50
bool b_runloop = true;
static int write_pid_into_fd(int fd, pid_t pid)
{
@ -65,7 +67,6 @@ static int write_pid_into_fd(int fd, pid_t pid)
return ret;
}
static int create_pid_file(pid_t pid)
{
int fd, ret;
@ -93,7 +94,6 @@ static int create_pid_file(pid_t pid)
return ret;
}
static int check_pid_file(int fd, pid_t pid)
{
int ret = -1;
@ -146,7 +146,6 @@ static int check_pid_file(int fd, pid_t pid)
return ret;
}
static int init_pid_file()
{
pid_t pid;
@ -175,7 +174,6 @@ static int init_pid_file()
return ret;
}
static void sigHandler(int sig)
{
if (sig == SIGINT || sig == SIGTERM)
@ -183,7 +181,6 @@ static void sigHandler(int sig)
_exit(0);
}
int menu()
{
int choice;
@ -206,30 +203,23 @@ void initscanner()
LOG("init m_scanner failed\n");
}
bool b_runloop = true;
int waittimes = 0;
#define WAITCONNECTMAXTIME 50
int main(int argc, char *argv[])
{
if (-1 == init_pid_file())
{
exit(-1);
}
/* Ctrl + C */
if (signal(SIGINT, sigHandler) == SIG_ERR)
{
exit(-1);
}
/* kill pid / killall name */
if (signal(SIGTERM, sigHandler) == SIG_ERR)
{
exit(-1);
}
creat_sleep_fifo();
initscanner();
start_enter_lowpwoer();
@ -238,17 +228,12 @@ int main(int argc, char *argv[])
int t_arg1 = atoi(argv[1]);
if (t_arg1 == 236)
{
LOG("onboard start auto correct!\n");
m_scanner->CreatCorrectData(0);
while (m_scanner->GetEvent().code != (int)HG_ScannerStatus::AUTO_FLAT_FINISHED)
{
std::this_thread::sleep_for(chrono::milliseconds(2));
}
}
else
{
LOG("onboard unkown command!\n");
}
}
while (b_runloop)
@ -269,35 +254,24 @@ int main(int argc, char *argv[])
std::this_thread::sleep_for(std::chrono::milliseconds(10));
continue;
}
// printf("Usb command %d \n",usbcb.Command);
switch ((USBCommand)usbcb.Command)
{
case USBCommand::GET_DSP_STATUS:
{
USBCB sts = {1, 0, 0};
if (m_scanner->IsScanning()) // 队列不为空
if (m_scanner->IsScanning()) //采集图像线程工作中
{
if (m_scanner->GetImagequeueEmpty())
{
// LOG("GetImagequeueEmpty\n");
auto evt = m_scanner->GetEventFront();
// if (evt != (int)HG_ScannerStatus::NORMAL && evt != (int)HG_ScannerStatus::STOP_SCAN)
if (evt.code != (int)HG_ScannerStatus::NORMAL && evt.code != (int)HG_ScannerStatus::STOP_SCAN)
{
sts.Data = m_scanner->GetEvent().code; // 确保第一张扫描之前所发生的异常事件能够被通知
}
}
else
{
LOG("not GetImagequeueEmpty\n");
int evt = m_scanner->GetEventFront().code;
if (evt != (int)HG_ScannerStatus::NORMAL && evt != (int)HG_ScannerStatus::STOP_SCAN)
{
sts.Data = m_scanner->GetEvent().code; // 扫描中途的事件能够被通知
}
else
{
HG_JpegCompressInfo info = m_scanner->GetFrontImage();
@ -308,10 +282,8 @@ int main(int argc, char *argv[])
}
else
{
// LOG("Scanning not scanning \n");
if (!m_scanner->GetImagequeueEmpty())
{
HG_JpegCompressInfo info = m_scanner->GetFrontImage();
sts.Data = (int)HG_ScannerStatus::HAVE_IMAGE;
sts.Length = info.DataLength;
@ -324,8 +296,7 @@ int main(int argc, char *argv[])
printf("关闭V4L2 4444\r\n");
m_scanner->close_v4l2();
}
sts.Data = data.code;
if (data.code == (int)HG_ScannerStatus::AUTO_FLATTING || data.code == (int)HG_ScannerStatus::AUTO_FLAT_FINISHED)
{
@ -344,7 +315,7 @@ int main(int argc, char *argv[])
case USBCommand::GET_IMAGE:
{
HG_JpegCompressInfo info = m_scanner->GetImage();
printf("USB error_code:%d\r\n",info.error_code);
//printf("USB error_code:%d\r\n",info.error_code);
if (info.pJpegData != nullptr && info.DataLength != 0 || info.error_code)
{
@ -542,22 +513,6 @@ int main(int argc, char *argv[])
printf("升级包下载:%s...\r\n",tmpUpdate.Data == 10 ? "失败":"成功");
// LOG("\n-----------START_UPGRADE----------------\n %d %d %d ", usbcb.Command, usbcb.Data, usbcb.Length);
// USBCB tmpUpdate = {(unsigned int)(USBCommand::START_UPGRADE), 0, 0};
// if (usbcb.Length != 0)
// {
// LOG("\n-----------read_bulk----------------");
// uint ntoReadn = usbcb.Length;
// char *bufferData = (char *)malloc(ntoReadn * sizeof(char));
// if (bufferData)
// {
// m_scanner->read_bulk(bufferData, ntoReadn);
// updatePkg.write(bufferData, ntoReadn);
// tmpUpdate.Length = ntoReadn;
// free(bufferData);
// }
// }
// m_scanner->write_bulk(&tmpUpdate, sizeof(tmpUpdate));
}
break;
case USBCommand::UPDATE_FINISHED:
@ -800,10 +755,7 @@ int main(int argc, char *argv[])
{
lut_buffer = new unsigned char[flatinfo.params.datalen];
if (lut_buffer)
{
lut_item.read((char *)lut_buffer, flatinfo.params.datalen);
}
lut_item.read((char *)lut_buffer, flatinfo.params.datalen);
else
{
flatinfo.params.status = 2; // OOM 异常
@ -835,6 +787,8 @@ int main(int argc, char *argv[])
m_scanner->write_bulk(&usbcb, sizeof(usbcb));
break;
default:
usbcb.Data = 56833;
m_scanner->write_bulk(&usbcb, sizeof(usbcb));
break;
}
}

260
zynq_7010_code/scanservices_utils.h
View File

@ -60,7 +60,7 @@ typedef struct
#define STR(X) #X
#define CON(a,b) STR(a##b)
typedef void (*image_callback)(int element);
static std::map<int , sp_COLOR_or_GRAY>mapFradme_SP={
{1,{0x08ED1003,0x1ACC1002,CON(G34D,231027)}},//40 ppm
{2,{0x06DB1003,0x14A01002,CON(G3ZY,231102)}},//50 ppm
@ -307,4 +307,260 @@ enum scanner_err
SCANNER_ERR_UPDATE_CHECK_VAL_ERROR, //设备更新：校验检测错误
SCANNER_ERR_UPDATE_CHECK_FILE_LOST, //设备更新：文件丢失
SCANNER_ERR_UPDATE_UNZIP_FAIL, //设备更新：解压失败
};
};
enum ScanEvent {
S_EVT_NORES = 0x0,
S_EVT_SCAN_FINISHED = 0x2,
S_EVT_CLEAR_ERR = 0x03,
S_EVT_PAPER_PULLOUT = 0x05,
S_EVT_COVER_OPENED = 0x01,
S_EVT_COVER_CLOSED = 0x102,
S_EVT_PAPER_AT_SCAN = 0x08,
S_EVT_PAPER_NOT_AT_SCAN = 0x106,
S_EVT_DOUBLEPAPER = 0x110,
S_EVT_NOT_DOUBLEPAPER = 0x111,
S_EVT_START_SCAN = 0x45,
S_EVT_STOP_SCAN = 0x46,
S_EVT_SCAN_STARTED = 0x112,
S_EVT_SCAN_STOPPED = 0x113,
S_EVT_JAM_IN = 0x114,
S_EVT_JAM_OUT = 0x115,
S_EVT_SAMPLE_ERR = 0x116,
S_EVT_COVER_IN_OPEN = 0x117,
S_EVT_ERROR_PICKING = 0x4,
S_EVT_ERROR_JAM = 0x8,
S_EVT_ERROR_DOUBLEPAPER = 0x10,
S_EVT_ERROR_STAPLE = 0x20,
S_EVT_ERROR_FPGA = 0x44,
S_EVT_HAVING_IMAGE = 0x47,
S_EVT_ONE_PAPER_END = 0x59,
S_EVT_PAPER_NOT_STANDBY = 0,//?
S_EVT_PAPER_STANDBY = 0 //?
};
typedef struct
{
int Command;
int Data;
int Length;
} USBCB;
enum class USBCommand : unsigned int
{
//无命令
NO_COMMAND = 0,
//获取dsp 状态
GET_DSP_STATUS = 1,
//取图
GET_IMAGE = 2,
//销毁DSP中驻存的图
POP_IMAGE = 3,
//开始扫描命令
START_COMMAND = 4,
//停止扫描命令
STOP = 5,
//获取扫描仪扫描模式
GET_SCAN_MODE = 6,
//获取固件版本号
GET_FW_VERSION = 7,
//返回PC端的状态
SEND_STATUS_PC = 8,
//下发扫描配置参数
CONFIGURED_DATA = 9,
//下发固件信息
SEND_FW = 10,
//获取扫描参数
GET_CONFIG_DATA = 11,
//获取扫描总张数
GET_SCANN_NUM = 12,
//获取有无纸的状态
GET_PAPERFEEDER_STATUS = 13,
//DSP初始化
INIT_HARDWARE_SYS = 14,
//下发元器件配置参数（灰度，LED R曝光时间）
SEND_COMPONENTS_GR = 15,
//下发元器件配置参数（LED G/B曝光时间）
SEND_COMPONENTS_GB = 16,
//下发扫描模式
SEND_SCAN_MODE = 17,
//开始进行平场矫正
START_FLAT = 18,
//停止平场矫正
STOP_FLAT = 19,
//下发200dpi彩色平场矫正参数
SEND_200_COLOR_FLAT_DATA = 20,
//下发300dpi彩色平场矫正参数
SEND_300_COLOR_FLAT_DATA = 21,
//获取200dpi彩色平场矫正参数
GET_200_COLOR_FLAT_DATA = 22,
//获取300dpi彩色平场矫正参数
GET_300_COLOR_FLAT_DATA = 23,
//下发200dpi灰度平场校正参数
SEND_200_GRAY_FLAT_DATA = 24,
//下发300dpi灰度平场校正参数
SEND_300_GRAY_FLAT_DATA = 25,
//获取200DPI灰度平场校正参数
GET_200_GRAY_FLAT_DATA = 26,
//获取300DPI灰度平场校正参数
GET_300_GRAY_FLAT_DATA = 27,
//下发序列号命令
SEND_SERIAL = 28,
//获取序列号命令
GET_SERIAL = 29,
//获取滚轴数
GET_ROLLER_NUM = 0x1e,
//清零滚轴数
CLR_ROLLER_NUM = 0x1f,
//清除扫描总张数
CLR_SCAN_NUM = 0x20,
//准备更新固件
PRE_UPGRADE = 0X21,
//开始更新固件
START_UPGRADE = 0x22,
//彩色的AD参数
RGB_ADI_PARA = 0x23,
//灰度的AD参数
ADI_PARA = 0x24,
//获取CIS参数（曝光时间，ad参数)
GET_CIS_PARA = 0x25,
//扫描张数
START_COMMAND_COUNT = 0x26,
//下发休眠时间
SET_SLEEP_TIME = 0x27,
//获取休眠时间
GET_SLEEP_TIME = 0x28,
//清除缓存
CLR_CACHE = 0x29,
//下发速度模式
SET_SPEED_MODE = 0x2a,
//获取扫描速度模式
GET_SPEED_MODE = 0X2b,
//设置固件版本一共8个字节
SET_FW_VERSION = 0X2c,
//获取DSP版本
GET_DSP_VERSION = 0X2d,
//采集板FPGA固件版本
GET_SCANFPGA_VERSION = 0x2e,
//电机板FPGA固件版本
GET_MOTORFPGA_VERSION = 0X2f,
//设置制造商信息
SET_USB_INFOR_MANUFACTURE = 0X30,
//获取制造商信息
GET_USB_INFOR_MANUFACTURE = 0X31,
//设置产品型号信息
SET_USB_INFOR_MODEL_NAME = 0X32,
//获取产品型号信息
GET_USB_INFOR_MODEL_NAME = 0X33,
//设置USB PID / VID信息
SET_USB_INFOR_VIDPID = 0X34,
GET_USB_INFOR_VIDPID = 0X35,
//设置卡纸急停检测灵敏度
SET_JAM_DETECT_SENSITIVE = 0X36,
//获取卡纸急停检测灵敏度
GET_JAM_DETECT_SENSITIVE = 0X37,
//设置横向畸变系数
SET_JUST_COF_H = 0x38,
//读取横向畸变系数
GET_JUST_COF_H = 0x39,
//G400 清除硬件异常
CLEAR_HWERROR = 0x40,
//设置纵向畸变系数
SET_JUST_COF_V = 0x41,
//读取纵向畸变系数
GET_JUST_COF_V = 0x42,
//设置彩色校正参数
SEND_COLOR_FLAT = 0x43,
//设置彩色平场校正参数
SEND_COLORCORRECT_FLAT = 0x44,
//设置灰度校正参数
SEND_GRAY_FLAT = 0x45,
//设置灰度平场校正参数
SEND_GRAYCORRECT_FLAT = 0x46,
//设置平场校正参数
GET_FLAT_DATA =0x47,
//更新完成
UPDATE_FINISHED = 0x48,
//重启
REBOOT = 0x49,
//获取日志
GET_LOG_FILES_INFO = 0x50,
//发送log文件完成
GET_UPDATE_RESULT=0x51,
//清空日志
CLEAR_LOG_FILES = 0x52,
//获取搓纸失败
GET_CUO_ERROR,
//获取双张失败次数
GET_DOU_ERROR,
//获取卡纸次数
GET_JAM_ERROR,
ACTIVE_SCANNER=0x100,
//图像处理参数下发
GETSYSINFO_LEN =0x200,
GETSYSINFO =0x201,
GETMOTORPARAM = 0x202,
GETMOTORPARMLEN=0x203,
SETMOTORPARAM = 0x204,
SETMOTORPARAMLEN = 0x205,
DEVICES_7010 = 0x7010
};
enum class HG_ScannerStatus
{
//异常
HAVE_ERROR = -1,
//正常状态
NORMAL = 0,
//开盖
OPEN_COVER = 1,
// 无纸
NO_FEED = 2,
// 搓纸失败
FEED_IN_ERROR = 4,
// 卡纸
PAPER_JAM = 8,
// 检测到双张
DETECT_DOUBLE_FEED = 16,
// 检测到订书钉
DETECT_STAPLE = 32,
// 纸张倾斜
PAPER_SKEW = 64,
// 自动模式
AUTO_SCAN_MODE = 65,
// 手动模式
MANAUL_SCAN_MODE = 66,
// 计数模式
COUNT_MODE = 67,
// 硬件错误
HARDWARE_ERROR = 68,
// FPGA崩溃
FPGA_ERROR = 68,
// 开始
START_SCAN = 69,
//停止
STOP_SCAN = 70,
//有图
HAVE_IMAGE = 71,
// 更新扫描参数
UPDATE_SCAN_PARAMETER = 72,
// PC繁忙或出错
PC_SCAN_BUSY_or_ERROR = 73,
// 更新完成
UPDATE_FINISHED = 74,
//尺寸检测错误
SIZE_ERROR=75,
//纸张有孔
PAPER_HOLE = 84,
//自动校正中
AUTO_FLATTING=198,
//USB 未连接
USB_DISCONNECTED = 200,
//用户点击停止
USER_STOP = 201,
//自动平场校正完成
AUTO_FLAT_FINISHED = 202,
SCANNER_ACTIVED=0x10
};

230
zynq_7010_code/utilsfunc.cpp
View File

@ -4,8 +4,8 @@
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include "filetools.h"
#include <fstream>
using namespace std;
#define VMRSS_LINE 21
#define VMSIZE_LINE 17
@ -17,34 +17,6 @@
#define LUT_COLOR_LUT_PATH "/usr/local/huago/color_lut.bmp"
#define LUT_GRAY_LUT_PATH "/usr/local/huago/gray_lut.bmp"
//using namespace cv;
// cv::Mat extractRepresentRow(const cv::Mat &src)
// {
// LOG("extractRepresentRow2 enter \n");
// Mat src_temp(src.rows, src.step, CV_8UC1, src.data);
// Mat dst(1, src.cols, CV_8UC(src.channels()));
// Mat dst_temp(1, src.step, CV_8UC1, dst.data);
// for (int i = 0, length = src.step; i < length; i++)
// {
// Mat col = src_temp(Rect(i, 0, 1, src_temp.rows));
// float value = 0;
// for (int j = 0, rows = col.rows; j < rows; j++)
// {
// value += (float)col.at<unsigned char>(Point(0, j)) / rows;
// }
// dst_temp.data[i] = (int) value;
// }
// LOG("extractRepresentRow2 exit \n");
// return dst;
// }
float curve_coffes[2][3][3] = {
{
{-6e-5, 0.9928, 0.289},
@ -58,204 +30,6 @@ float curve_coffes[2][3][3] = {
}
};
// cv::Mat create_lut(const cv::Mat &black, const cv::Mat &white,bool colormode,CISVendor vendor)
// {
// LOG("create_lut enter \n");
// #ifdef G400
// int channel = 4896 / 12; // 1632*3
// #else
// int channel = 5184 / 12; // 1728*3
// #endif
// const int rows = black.cols / channel; //408
// const int cols = 256;
// LOG("LUT White width: %d height :%d channels:%d \n", white.cols, white.rows, white.channels());
// LOG("LUT black width: %d height :%d channels:%d \n", black.cols, black.rows, black.channels());
// Mat lut(rows, cols, CV_8UC(channel));
// float* cisCoffoes;
// float* coffoes;
// if(vendor==CISVendor::DUNNAN_CIS_V0)
// cisCoffoes = &curve_coffes[0][0][0];
// else if(vendor==CISVendor::HUALIN_CIS_V0)
// cisCoffoes = &curve_coffes[1][0][0];
// else
// {
// cisCoffoes = &curve_coffes[1][0][0];
// LOG("warnning!!! unknown cis type,use hualin CIS cisCoffoes params \n");
// }
// for (size_t i = 0; i < rows; i++)
// {
// Mat lut_row = lut(cv::Rect(0, i, cols, 1));
// unsigned char *ptr_buffer = lut_row.data;
// unsigned char *ptr_black = black.data + i * channel;
// unsigned char *ptr_white = white.data + i * channel;
// for (size_t j = 0; j < cols; j++)
// {
// for (size_t k = 0; k < channel; k++)
// {
// if (ptr_black[k] >= ptr_white[k])
// {
// ptr_buffer[j * channel + k] = 0;
// LOG("ptr_black[%d] >= ptr_white[%d]", k, k);
// continue;
// }
// if (j <= ptr_black[k])
// {
// ptr_buffer[j * channel + k] = 0;
// }
// else if (j >= ptr_white[k])
// {
// ptr_buffer[j * channel + k] = 255;
// }
// else
// {
// if(colormode==IMAGE_COLOR)
// {
// float val = 255.0 * (j - ptr_black[k]) / (ptr_white[k] - ptr_black[k])*1.2;
// // if (k % 3 == 2)
// // val = pow(10, -6) * pow(val, 3) - 0.0004 * pow(val, 2) + 1.0065 * val - 1.6495;
// // else if (k % 3 == 1)
// // val = 7 * pow(10, -7) * pow(val, 3) - 0.0002 * pow(val, 2) + 0.9861 * val - 0.4419;
// // else
// // val = -pow(10, -7) * 9 * pow(val, 3) + 0.0001 * pow(val, 2) + 1.0627 * val + 1.1538;
// coffoes = cisCoffoes + 3 * (k % 3);
// val = coffoes[0] * val * val + coffoes[1] * val + coffoes[2];
// if (val > 255)
// val = 255;
// if (val < 0)
// val = 0;
// ptr_buffer[j * channel + k] = (unsigned char)val;
// }
// else
// {
// float val = 255.0 * (j - ptr_black[k]) / (ptr_white[k] - ptr_black[k])*1.2;
// if (val > 255)
// val = 255;
// if (val < 0)
// val = 0;
// ptr_buffer[j * channel + k] = (unsigned char)val;
// }
// }
// }
// }
// }
// LOG("create_lut exit \n");
// return lut;
// }
void initLut()
{
//lutoldGrayMat = cv::imread(LUT_GRAY_LUT_PATH, IMREAD_GRAYSCALE); //灰色校正值
//lutoldColorMat = cv::imread(LUT_COLOR_LUT_PATH, IMREAD_GRAYSCALE); //彩色校正值
}
//void correctColor(cv::Mat src, bool enhance)
//{
// Mat tSrc;
// Mat lutMat;
// int patch = 0;
// int SIZE = src.cols / 12;
// //printf("lutMat.empty() src.width::%d SIZE: %d \n", src.cols, SIZE);
// if (src.type() == CV_8UC3)
// {
// patch = (src.cols * 3) / SIZE;
// if (lutoldColorMat.empty())
// {
// if (access(LUT_COLOR_LUT_PATH, F_OK) != -1)
// {
// lutoldColorMat = imread(LUT_COLOR_LUT_PATH, IMREAD_GRAYSCALE);
// }
// else
// {
// LOG("error error error %s NOT FOUND \n", LUT_COLOR_LUT_PATH);
// return;
// }
// }
// lutMat = lutoldColorMat;
// }
// else
// {
// patch = (src.cols) / SIZE;
// if (lutoldGrayMat.empty())
// {
// if (access(LUT_GRAY_LUT_PATH, F_OK) != -1)
// {
// lutoldGrayMat = imread(LUT_GRAY_LUT_PATH, IMREAD_GRAYSCALE);
// }
// else
// {
// LOG("error error error %s NOT FOUND", LUT_GRAY_LUT_PATH);
// return;
// }
// }
// lutMat = lutoldGrayMat;
// }
// if (lutMat.empty())
// {
// return;
// }
// lutMat = cv::Mat(patch, 256, CV_8UC(SIZE), lutMat.data);
// tSrc = cv::Mat(src.rows, patch, CV_8UC(SIZE), src.data);
// for (int i = 0; i < patch; i++)
// {
// LUT(tSrc(cv::Rect(i, 0, 1, src.rows)), lutMat(cv::Rect(0, i, 256, 1)), tSrc(cv::Rect(i, 0, 1, src.rows)));
// }
//}
// void creatLUTData(int mode,CISVendor vendor)
// {
// LOG("eneter creatLUTData \n");
// auto colormode = mode == IMAGE_COLOR ? IMREAD_COLOR : IMREAD_GRAYSCALE;
// std::string blackPath = mode == IMAGE_COLOR ? LUT_COLOR_BLACK_PATH : LUT_GRAY_BLACK_PATH;
// std::string whitePath = mode == IMAGE_COLOR ? LUT_COLOR_WHITE_PATH : LUT_GRAY_WHITE_PATH;
// std::string lutsavePath = mode == IMAGE_COLOR ? LUT_COLOR_LUT_PATH : LUT_GRAY_LUT_PATH;
// cv::Mat lut;
// cv::Mat twMat = cv::imread(whitePath, colormode);
// cv::Mat tbMat = cv::imread(blackPath, colormode);
// cv::Mat wMat, bMat;
// if (mode == IMAGE_COLOR)
// {
// wMat = cv::Mat(twMat.rows, twMat.cols * 3, CV_8UC1, twMat.data);
// bMat = cv::Mat(twMat.rows, twMat.cols * 3, CV_8UC1, tbMat.data);
// }
// else
// {
// wMat = twMat;
// bMat = tbMat;
// }
// lut = create_lut(extractRepresentRow(bMat), extractRepresentRow(wMat),mode,vendor); // add by liuyong: 刘丁维提供 2019/4/12
// Mat dst(bMat.cols * bMat.channels(), 256, CV_8UC1);
// memcpy(dst.data, lut.data, bMat.cols * bMat.channels() * 256);
// cv::imwrite(lutsavePath, dst);
// LOG("exit creatLUTData \n");
// }
// cv::Mat flipRightHalf(Mat &src, int papertype)
// {
// Mat left = src(cv::Rect(0, 0, src.cols / 2, src.rows));
// Mat right = src(cv::Rect(src.cols / 2, 0, src.cols / 2, src.rows));
// Mat rightFlip;
// // if (papertype == (int)(PaperSize::G400_A4R))
// // {
// flip(right, rightFlip, 0);
// // }
// // else
// // {
// // flip(right, rightFlip, 1);
// // }
// Mat dst;
// hconcat(left, rightFlip, dst);
// return dst;
// }
void SaveScaninfo(const ScannerScanInfo &info)
{
js_config.SaveScanInfo(info);